Tilt Wall Mount

INSTALLATION MANUAL
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.

Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

• Mounts must be attached as specified in the instructions. Improper installation may cause damage or serious personal injury.
• The wall structure must be capable of supporting at least four times the maximum load. If not, the mounting surface must be reinforced.
• The supporting wall/ceiling must be constructed of solid wood, brick, concrete or solid concrete block. Installation on any wall or surface, other than those listed may lead to instability and possible injury.
• Do not use this product for any purpose not explicitly specified by manufacturer.
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
• You must follow all instructions closely. Failure to do so may result in injury or death.

• This product contains small parts. Keep small parts away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and property damage.
• Provide adequate ergonomic and safety access to the installed product.

Note: Inspect the mounting bracket for any damage before mounting the product. Do not use the bracket if it is damaged.

Note: Retain these instructions and all hardware for future use.

Note: Check that the bracket is secure and look for signs of wear or mistreatment at least once every three months.

Illustration of wall mount installation
PM-T600
200x200/300x300 400x200/400x400 600x400
32-65" 81-165cm
75kg (165lbs) RATED

PureLink GmbH
Von-Liebig-Str. 10 I 48432 Rheine I Germany
Phone: +49 (0) 5971 800 299 0

Note: PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

1a

1b

2a

2b

3

Legal & Compliance

Product identification

Model: PM-T600 – manual version 1.0

Warranty and liability

The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.