Introduction

Thank you for choosing the active DisplayPort 1.4 optical fiber AOC cable. With this cable, you can transmit DisplayPort signals without external Power Delivery for distances up to 100m. The cable is a hybrid cable, containing both optical fibers and copper wires. Our DisplayPort Active Hybrid Cable is the most competitive DisplayPort connection solution on the market. It supports a maximum data rate of 8.1 Gbit/s per channel, is lightweight, flexible, and has a very small bending radius of only 48 mm. With the embedded advanced optical engine, the DisplayPort Hybrid Cable ensures full signal integrity.

Intended Use

Use is permitted only indoors, not outdoors. Contact with moisture, e.g. in bathrooms and similar environments, must be strictly avoided. For safety and approval reasons (CE), you must not modify and/or alter the product. If you use the product for purposes other than those described above, the product may be damaged. Furthermore, improper use may cause hazards such as short circuit, fire, electric shock, etc. Please read the operating manual carefully and keep it. Pass the product on to third parties only together with the operating manual.

Safety Instructions

Please read the user manual carefully and pay special attention to the safety instructions. If you do not follow the safety instructions and the information on proper handling in this manual, we assume no liability for resulting personal or property damage. Furthermore, the warranty/guarantee will become void in such cases.

• This product is not a toy. Keep it away from children and pets.
• Do not leave the packaging material lying around carelessly. It could become a dangerous toy for children. Risk of suffocation!

The maximum tensile load of the cable is 300N (30kg). Never pull the cable with a higher load. The minimum bending radius of the hybrid cable is approx. 48 mm. Bending the cable to a smaller radius will cause irreversible damage. Be aware of trip hazards; ensure the cable is securely installed. Protect the product from extreme temperatures, direct sunlight, strong vibrations, high humidity, moisture, flammable gases, vapors, and solvents. Do not expose the product to mechanical stress. If safe operation is no longer possible, take the product out of service and protect it from unintended use.

Safety Instructions for Operation

Safe operation is no longer guaranteed if the product:

• shows visible damage
• no longer functions properly
• has been stored under unfavorable environmental conditions for an extended period, or
• has been subjected to significant transport stresses.

Handle the product carefully. Shocks, impacts, or even drops from a low height can damage the product. Also observe the safety instructions and user manuals of other devices connected to the product. Consult an expert if you have doubts about the operation, safety, or connection of the product.

Scope of Delivery

• 1x DisplayPort 1.4 AOC Cable
• 1x User Manual DE/EN
• 1x Warning Notice

Features

• Support for DisplayPort 1.4 specification with data rates up to 32.4 Gbps
• Support for HDCP1.4 and HDCP2.2
• Support for HBR3
• Low RFI / EMI profile for sensitive applications
• Support for resolutions up to Ultra HD 8K (7680x4320) 60Hz, 4:4:4
• Lossless support of DisplayPort audio formats
• Supports EDID including self-recognition function
• Long-term bending radius (48 mm)
• Plug & Play connector
• Low power consumption: < 0.5 W per connector (power required)

Application

• Digital Signage
• LED Signboards
• Home Theater
• Blu-ray, 3D video, projectors, set-top boxes, DVR, gaming consoles and computers
• TV broadcasters
• Conference rooms
• Video devices
• Security systems
• ... and more.

Specifications

*D = the diameter of the cable body, in this case 4.8mm

Additional Specifications

Environmental Conditions

Cross-section

Structure

Hybrid cable, optical fiber (high speed data), copper (low speed signals)

Cable Construction

• 4 fiber cores and 8 copper conductors
• Cable jacket: PVC
• Diameter: 4.8 mm
• Connector dimensions: 46.9 x 20 x 12.3 mm
• Connector material: zinc alloy

FAQ - Troubleshooting

The display shows:

• A black screen
• A distorted image
• Interference noise

1. Check that the connections are in the correct sockets of the source and receiving devices; verify the markings on the connectors.
2. Ensure that the DisplayPort connectors are firmly plugged into the DisplayPort source and the DisplayPort display.
3. Verify that the DisplayPort source and the DisplayPort display are powered on and have booted up correctly.
4. Reset the system by unplugging and re-plugging the [Source] and
5. [Display] connections.
6. Restart the system with the DisplayPort cable connected.

Connect to the Source Device

Connect to the Receiving Device

Maintenance

There are no user-serviceable components inside the product; therefore, never open or disassemble it. Maintenance, adjustment, and repair work must be carried out exclusively by a qualified technician or service center. If you have questions not answered in this manual, please contact our technical support or a specialist.

Cleaning

Before any cleaning, the product must be disconnected from any connected devices.

Do not use abrasive cleaners, solvents, aggressive cleaning agents, cleaning alcohol, or other chemical solutions as they may damage the housing or impair functionality.

For cleaning, a dry, soft, and clean cloth is sufficient. Do not press too hard on the housing, as this may cause scratches. Dust can be easily removed with a long-haired, soft, and clean brush.

Warranty and Liability

The manufacturer grants the statutory warranty of 2 years on a new product. Since the manufacturer has no control over the product installation, the warranty and guarantee cover only the product itself.

If an error or defect is detected on your product, please contact your dealer and present your receipt or invoice as proof of purchase if necessary. Your dealer will either fix the issue on-site or forward the product to the manufacturer. You help our technicians significantly by describing any errors in detail – only then can rare errors be reliably detected and fixed!

The manufacturer is not liable for personal injury or property damage caused by improper installation, operation or maintenance not described in this manual. Do not modify or alter the product or its accessories.

Use other than described in this manual is not permitted and leads to loss of warranty/guarantee and exclusion of liability.

CE Compliance

PureLink GmbH hereby declares that FX-I250 complies with Directive 2014/30/EU. The full text of the EU declaration of conformity is available at the following internet address:

www.purelink.de/ce/FX-I250-XXX_CE.pdf

Device Disposal

WEEE Reg. No.: DE 93847290

Electrical and electronic devices must not be disposed of with household waste according to European WEEE Directive. As a consumer, you are obliged under the ElektroG to return electrical and electronic devices at the end of their service life to public collection points or the point of sale free of charge. Details are regulated by the respective national laws. The symbol on the product, in the user manual, or on the packaging indicates these regulations. By recycling your old devices in this way, you make an important contribution to protecting our environment.

Disclaimer

The product complies with legal, national, and European requirements. All company names and product designations mentioned are trademarks of their respective owners.

All rights reserved. Printing errors and changes to the device, packaging, or manual are subject to change without notice.

Legal & Compliance

Product identification

Models: FX-I250-015, FX-I250-025, FX-I250-040, FX-I250-050, FX-I250-060, FX-I250-070, FX-I250-100 – manual version 1.0

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.