Supplementary Safety, Installation, Cleaning and Disposal Instructions.

There is a risk of severe injury in the event of failure to comply with the information contained in this document!

1. Before attempting any installation or operation of this product for the first time, read this document carefully.
2. This document must be retained indefinitely and, if the product is installed elsewhere or passed on to a 3rd party, this document must accompany it.
3. This product is unsuitable for unsupervised use by children or other people who require supervision.
4. An installation location should be selected where humidity levels and temperatures at all times of the year and all foreseeable uses of that location are not higher than those stated in the data sheet.
5. The chosen installation location must also be free of moisture, solvents, flammable gases, dust and vapours at all times.
6. Multi-sockets are not a replacement for a fixed installation and are not designed for continuous use with heavy loads! Examples of a heavy load include any electrical heating device such as space heaters or ovens; or any device with a powerful motor or compressor such as heavy power tools, washing machines or refrigerators.
7. Faulty multi-sockets must be taken out of operation immediately and be disposed of in an environmentally responsible manner.
8. Do not attempt to fix or open the product! In the event of a fault, take the product out of operation (disconnect it from the mains supply) and contact a qualified electrician or a specialist dealer.
9. If you have questions about any of the above or are concerned in any way that you cannot operate the product in a safe manner, please contact your supplier or a PureLink representative BEFORE using the product.

Intended, foreseeable and normal use

The PureLink mediahub2 is a mobile, rewirable product range available in three mounting configurations: On to a table, under a desk or on to the wall (or any other appropriate office furniture) of commercial environments such as work spaces or meeting rooms in a semi-permanent but adjustable installation. The product is intended for use in dry and closed rooms (protection class IP20).

The intended use is a fixed but easily moveable installation for supply of electrical voltage (via different socket types) and configurable access to multi-media connections. Use for offices and similar purposes, excluding construction and installation work. Use only in clean indoor areas at a maximum ambient temperature of 5°C, to/or occasionally 35°C. Do not use in the immediate vicinity of chemical emissions (e.g. oil, mist, solder fumes) or dust sources. The product must not be opened and/or modified or extended! A different use than the intended use, as well as changes made to the product, can lead to damage of the product, serious material damage and personal injury!

The foreseeable and normal use of the USB functionality is use by adults and children with smartphones, portable computers (e.g. laptops, tablets), and other low voltage battery-operated, portable electronic devices. Other use can pose electric shock hazard, overheat and pose a burn or fire hazard, causing electrocution, burns or smoke inhalation.

Cleaning

Caution: Before attempting to clean the product, disconnect the product from the mains supply.

Do not clean with aggressive, corrosive, or scouring cleaning agents or solvents. Before cleaning with cleaning agents, apply the chosen cleaning agent to a concealed area to check that the materials are compatible.

Caution: If liquids penetrate the device, they may cause a short circuit.

Clean the product with a lightly moistened cloth and mild cleaning agent. Soft water (i.e. water containing little lime) reduces streaking and limescale. Before putting the product back into operation, make sure that it is completely dry. Liquid must never enter the device.

Installation and maintenance

Caution: Whenever any work is carried out on the physical or electrical installation, or whenever you perform mains voltage connection work, observe the following safety rules:

1. Improper installation endangers your own life and the lives of anyone who uses the electrical system.
2. Improper installation poses a risk of severe property damage, e.g. due to fire. There is a risk to you of personal liability in the event of injuries or property damage.
3. Only personnel with necessary, adequate and relevant electrotechnical qualifications and experience are allowed to perform, installation, connection, and maintenance of this product.
4. The following specific knowledge is also required when attempting installation, connection, and maintenance of this product: A. Implement the 5 safety rules: i. Disconnect completely. ii. Secure against re-connection; iii. Verify that the installation is dead by measurement at all poles iv. Carry out earthing and short-circuit protection v. Provide protection against adjacent live parts B. Select suitable tools, measuring devices and, if necessary, personal protective equipment C. Evaluate all measurement results carefully and make a qualified judgment D. Select the appropriate electrical installation materials/equipment, to ensure safe power-off conditions are met before work is carried out E. Install of the electrical installation material F. IP protection classes G. The three main types of earthing systems, namely TT, IT, and TN H. The resultant earthing connection system relevant for the earthing system and region where it is deployed (classic neutralisation, protective earth, necessary additional measures etc.)

Energy efficiency

DC power supply products provide the described voltages and currents with no additional end product settings being required. In accordance with Commission Regulation (EU) 2019/1782, energy efficiency data for the power supply provided with this product is available here: https://www.purelink.de

Disposal of used products

Disposing of batteries: Products which contain batteries must be treated as hazardous waste and must be disposed of in an environmentally sound manner in the appropriate locations (retailers, specialist dealers, municipal collection points, commercial disposal companies). Batteries may contain toxic heavy metals. Never dispose of batteries with household waste!

Legal & Compliance

Product identification

Model: M2-ENC05-1811 – manual version 1.0

Warranty and liability

The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

EU conformity

PureLink GmbH hereby declares that this product is in compliance with the directives 2014/30/EU and 2011/65/ EU amended by 2015/863 EU The full text of the EU Declaration of Conformity is available at the following internet address: www.

The full text of the EU Declaration of Conformity is available at: www.purelink.de

WEEE reg. no.: DE 93847290

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.