页 1

INSTALLATION MANUAL

Caution: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!

200x200/300x300
400x200/400x400

600x400

PDS-1201C 70"
MAX
70kg (154lbs) RATED
200x200/300x300
400x200/400x400

600x400

PDS-1101C 70"
MAX

• Maintenance
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
• Please contact your distributor if you have any questions.

7. Cable Management

Use the cable clips for routing the cables.

8. Adjustment

45°
90°

Flat Panel Display Cart

Loosen the tilt handle to adjust the display to obtain the desired angle then tighten it.
Note: Tilt handle can be pulled out due to a limit amount of space.
+3° -3°

页 2

• 5mm Allen key (x1) P-C
• M8x15 (x7) P-A
• M8x40 (x3) P-B
• 6mm Allen key (x1) P-D
• D8 metal washer (x3) P-E
• D8 plastic washer (x4) P-F
• D8 metal washer (x4) P-G

NOTE: Read the entire instruction manual before you start installation and assembly.

• Package P
• Package M
• washer M-F (x4)
• M8x20 M-C (x4)
• M5x14 M-A (x4)
• M6x14 M-B (x4)
• big spacer (x4) M-H
• M6x30 M-D (x4)
• M8x30 M-E (x4)
• small spacer (x8) M-G

• Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
• This mounting bracket was designed to be installed and utilised ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
• Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage to the items, This greatly reduces their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

Component Checklist

• column (x1) C
• cable clip (x5) F
• wheel caster (x2) E
• wheel caster/brake (x2) D
• base (x1) A
• tilt plate (x1) B
• universal plate (x1) G
• adapter bracket (x2) H
• wrench (x1) I

Note: Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, telephone your local distributor for a replacement.

页 3

3.Attaching the Column to the Base

2. Installing the Casters

• Insert the casters into the holes of legs and hand thread to secure.
• Attach the casters with brake to the long legs.
• Attach the casters without brake to the short legs.
• NOTE: Lock the brakes on the casters to avoid sudden movements during installation.

Attach the column to the base using three screws and tighten all screws to secure them.

1. Attaching the Tilt Plate to the Column

• P-A
• P-E
• P-C

4.Attaching the Universal Plate to the Tilt Plate

Attach the tilt plate to the column using the appropriate screws and washers.
Then tighten all screws with an Allen key to secure it.

Attach the universal plate to the tilt plate using the appropriate screws and washers. Then tighten all screws with an Allen key to secure it.

• P-D
• P-B
• I
• P-A
• P-F
• P-C
• P-G

页 4

5. Installing the Adapter Brackets

Top of the display
H

5-1 For Flat Back Screens

TV

• M-A
• M-B
• M-C
• M-F

5-2 For Recessed Back Screens or to Access A/V Inputs

TV

Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.

• M-C
• M-C
• M-D
• M-E
• M-F
• M-G
• M-F
• M-G
• M-D
• M-E
• M-F
• M-H
• M-D
• M-E
• M-F
• M-H
• M-G
• M-G

Tighten all screws but do not over tighten.

• Position the adapter brackets as close as possible to the center of the display.
• Screw the adapter brackets onto the display.

6. Hanging the Display onto the Universal Plate

Tighten the bottom bolts to secure the brackets to the universal plate.

Legal & Compliance

Product identification

Model: PDS-1101C – manual version 1.0

Warranty and liability

The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.