Tilt Wall Mount
INSTALLATION MANUAL
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
- CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- The wall structure must be capable of supporting at least five times the weight of the display and mount combined.
- The mounting surface must be able to support the weight of the equipment and all attached hardware and components.
- This product contains small items that could be a choking hazard if swallowed. Keep away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: If there are any missing and/or damaged parts, stop the installation and contact the manufacturer.
- Do not use incorrect hardware. Using improper or incorrectly fitted screws/bolts may result in injury. If any parts are missing or faulty, telephone your local distributor for a replacement.
Note: MAINTENANCE: Check that the bracket is secure and safe to use at regular intervals (at least once every three months).
PM-BT400 200x200/300x300/400x200/400x400
26-52" / 66-132cm
35kg (77lbs) RATED
PM-BT600 200x200/300x300/400x200/400x400/600x400
32-65" / 81-165cm
PureLink GmbH
Von-Liebig Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
1
| Part | Description |
|---|---|
| A (x1) | |
| M6x30 (x4) | M-A |
| M8x30 (x4) | M-B |
| D8 (x4) | M-C |
| D8 (x4) | M-D |
| B (x2) | |
| C (x1) | |
| W-A (x5) | |
| W-B (x5) | |
| W-C (x5) |
- ✓
- X
- X
2
M-A
M-B
M-C
M-D
3
4
0°
-14°
Legal & Compliance
Product identification
Model: PM-BT400 – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
EU conformity
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
| Directive / Regulation |
|---|
| 1907/2006/EU |
| 2011/65/EU |
The full text of the EU Declaration of Conformity is available at: www.purelink.de
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.