← Products
Steel Height Adjustable TV Cart, black
Discontinued

PM-CART-60B

Steel Height Adjustable TV Cart, black

The PureMounts® PM-CART-60B is a mobile and height-adjustable TV cart made of steel and plastics in black, with a load capacity of up to 35kg for screens sized 58-140 cm (23-55") and compatible with VESA patterns from …

ManualFAQ
Chapter 1 of 8

Step 6b

Attaching brackets and fixing screws to TV

Chapter 2 of 8

Step 7

Hanging TV onto cart and tightening screws

Chapter 3 of 8

Step 8

Securing TV and shelf installation

Chapter 4 of 8

Step 9

Tilting TV adjustment (+10° to -10°)

Read this instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

Caution: Do not begin installation until you have read and understood the instructions and warnings contained in this manual. Improper installation may result in damage, injury or death.

Caution: Use with products heavier than the rated weights indicated may result in collapse of the mount and possible injury.

Note: Do not use this product for any purpose not explicitly specified by manufacturer.

Note: Manufacturer is not responsible for damage or injury caused by incorrect mounting, assembly or use.

Note: Check carefully to make sure that all components are included. If anything is missing or faulty, contact your place of purchase.

Note: For the most up to date information, visit manufacturer’s website.

Chapter 5 of 8

Step 1

Note: Lock the brakes on the casters to avoid any sudden movements during installation.

Chapter 6 of 8

Step 2

Firmly hold the column and pull the safety spring lock out.

Caution: Please closely follow the instructions. Otherwise a sudden fall may occur resulting in personal injury.

Hold the safety spring lock and pull the column out slowly.

Note: When the indicator MAX is found on the column, it indicates that you have reached the highest setting and do not continue to pull the column out.

Make sure the safety spring lock align with the holes on the column before pressing it in the column.

Chapter 7 of 8

Step 3 / Step 4 / Step 5 / Step 6a

  • ✓
  • ✗
  • ✗
Was this helpful?
← PreviousNext chapter →
Staff sign-in