Hair Dryer Wall Mount
INSTALLATION MANUAL
For Dyson Supersonic
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local dealer.
Caution: Use only products heavier than the rated weights indicated may result in instability causing possible injury.
Caution: This product is intended for installation only by qualified personnel. Improper installation may result in property damage or personal injury.
Caution: Do not use this product for any purpose not explicitly specified by the manufacturer.
Note: The manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
Note: Before starting installation, carefully check all parts. DO NOT use any damaged hardware and components.
Caution: This product contains small parts that could be a choking hazard if swallowed. Keep these parts away from any children.
Caution: Do not overtighten fasteners. Doing so may damage your equipment.
Always read the instructions prior to installation. If any parts are missing or faulty, contact your place of purchase for a replacement. Do not use substitute parts.
Note: MAINTENANCE: Check that the product is secure and safe to use at regular intervals (every three months).
PM-HDY-11
5kg (11lbs) RATED
PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
INSTALLATION MANUAL
| A (x1) | B (x1) | C (x2) | D (x2) Ø6×30 | E (x2) M3×5 | F (x2) ST4.2×30 | G (x1) |
|---|
2a Adhesive/Glue Mounting
Clean the surface area and rear of the holder prior to applying glue or removing adhesive strips.
Note: Mount on tile, vinyl laminate, glass/mirror, metals and other smooth surfaces for the glue option and always use enough glue to install this mount on smooth surface.
- Attach the wall mount to the desired position and hold for approximately 1 minute.
- Then rest it for 48 hours before hanging any attachments and hair dryer.
2b Screws Mounting
For wood cabinets, drywalls, and other hard substrates.
| 35mm (1.4”) | Ø 3.5mm (Ø 9/50”) | 35mm (1.4”) | Ø 6mm (Ø 1/4”) |
|---|
3
Attach accessories to desired places.
Legal & Compliance
Product identification
Model: PM-HDY-11 – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.