INSTALLATION MANUAL

Read this entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

- The mounting surface must be strong and stable enough to support the mount and the monitors.
- Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.
- This product contains small parts that could present a choking hazard for small children. Keep these parts away from children.
- Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. PURE MOUNTS cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
- If you do not understand these instructions or have any doubts about the safety of the installation, please contact your local distributor. Check carefully to make sure the mount is securely installed before letting go of the monitor.
- Failure to provide adequate structural strength for this mount can result in serious personal injury or damage to equipment. It is the installer’s responsibility to make sure the structure to which the mount is attached can support five times the combined weight of all equipment. Reinforce the structure as required before installing the mount.

PureLink GmbH Rudolf-Diesel-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
- Step 5: Adjusting tilt angle with hex key M
- Step 6: Adjusting connections with hex keys M and L
- Step 7: Adjusting horizontal alignment with hex key L
Step 4
- 1
- M-A
- M-B
- M-C
- 3mm
Legal & Compliance
Product identification
Model: PM-OFFICE-03 – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.






