← Products
PureMounts® Monitor Desk Mount - Style 13-27"
Discontinued

PM-OFFICE-DM-23C

PureMounts® Monitor Desk Mount - Style 13-27"

PureMounts® Monitor Desk Mount - Style 13-27".

ManualFAQ
Chapter 1 of 8

INSTALLATION MANUAL

Read all the instructions manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance. Improper installation may cause damage or serious injury.

Safety Information

Figure 6: Mount fully assembled, cable being inserted into cable management.
Figure 6: Mount fully assembled, cable being inserted into cable management.
  • This product should only be installed by professionals.
  • Make sure the mount is securely installed before mounting the monitor/TV panel.
  • The manufacturer does not accept responsibility for incorrect installation.
  • Tighten all screws firmly. Do not over-tighten screws. Over-tightening can cause damage to parts and reduce the holding ability.
  • If mounting to wood wall studs, make sure mounting screws hit the center of the studs.
  • Before mounting ensure the support surface will safely support the combined weight of the TV and mount.
  • For installation in drywall, brick, concrete or similar surfaces, please use the appropriate fasteners for each material; when in doubt, please consult your local specialized dealer or a professional.
  • After mounting and installation, the product shall be loaded up to one time its own weight only, in order to ensure safe structure of the mount.
  • During operation of the mount, ensure there is no danger for persons or objects.
  • Do not exceed the maximum weight capacity indicated in the instructions.
  • Keep small parts and plastic bags away from children.
  • Keep this manual for future reference.

Diagram showing the assembled desk mount and installation components.
PM-OFFICE-DM-23C
75x75 100x100
13"-27" 33-69cm
8 kg RATED
PureLink GmbH
Von-Liebig-Straße 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

Figure 6: Mount fully assembled, cable being inserted into cable management.
Figure 7: Adjustment of the mount's tilt angle (+90° to -40°) using screw H.
Figure 8: Monitor rotation (360°) and height adjustment (max. 415mm).

Chapter 2 of 8

Step 1

A(x1) B(x1) C(x1) D(x1) E(x1) 3mm F (x1) 4mm G (x1) 6mm H (x1)
M4x14 (x4) M-A
M5x14 (x4) M-B
DS (x4) M-C

Chapter 3 of 8

Step 2a

Chapter 4 of 8

Step 2b

Chapter 5 of 8

Step 3

M-C M-A M-B

Chapter 6 of 8

Step 4

Chapter 7 of 8

Step 5

Boom

Was this helpful?
← PreviousNext chapter →
Staff sign-in