INSTALLATION MANUAL
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Do not exceed the maximum load capacity. The manufacturer will not be liable for product damage or injury caused by incorrect use or installation.
- Safety for yourself and others is very important. This product should be installed by someone familiar with its assembly and operation, to avoid personal injury.
- The mounting surface must be strong and sturdy enough to support the mount and attached hardware and components.
- This product should be mounted and used for the specified purpose only.
- The structure this product is being attached to must be able to support four times the product's listed maximum load.
- Tighten all screws firmly, but do NOT over tighten. Over tightening screws can damage the parts and cause failure of the mount.
- This product contains small parts that could pose a choking hazard if swallowed. Keep away from children.
Note: Please keep this manual for future reference and make sure that it is passed on in case of product transfer.
Note: Ensure you have received all parts and components before getting started. If any parts are missing or faulty, telephone your local distributor for a replacement.
Note: Check that the bracket is secure and is safe to use at regular intervals (at least once every three months).
PURE Mounts
Speaker wall mount illustration
PM-SOM-010
PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
PM-SOM-011
| Part | Quantity |
|---|---|
| A | 1 |
| B | 1 |
| M-A | 1 |
| M-B | 1 |
| W-A | 2 |
| W-B | 2 |
1a
5.5mm
1b
W-B
W-A
5.5mm
2
M-A
M-B
3
4
90°
+90°
-85°
-50°
+60°
Legal & Compliance
Product identification
Model: PM-SOM-011 – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
EU conformity
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
| Directive / Regulation |
|---|
| 1907/2006/EU |
| 2011/65/EU |
The full text of the EU Declaration of Conformity is available at: www.purelink.de
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.