← Products
Speaker Wall Mount for Sonos® Beam, white
Discontinued

PM-SOM-091

Speaker Wall Mount for Sonos® Beam, white

The PureMounts speaker wall mount for Sonos Beam is a fixed wall mount compatible with Sonos Beam speakers or soundbars, featuring a load capacity of up to 5kg and a speaker hole size of M5. It has dimensions of 127 x …

ManualSpecifications
Chapter 1 of 6

Wall-Mounted Sonos Beam Mount

INSTALLATION MANUAL

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your place of purchase.

Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

  • The wall or mounting surface must be able to safely support the combined load of the equipment and all attached hardware and components.
  • Follow all instructions and recommendations regarding adequate strength of walls and mounting surfaces and the safe installation of mounted equipment.
  • Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
  • Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.

Note: Before assembly, ensure you have received all parts according to the enclosed parts list. If any parts are missing or faulty, contact your place of purchase for a replacement.

PURE Mounts bracket illustration
PURE Mounts bracket illustration

Note: MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).

PM-SOM-090
PM-SOM-091
PureLink GmbH
Von-Liebig-Str. 10 I 48432 Rheine I Germany
Phone: +49 (0) 5971 800 299 0

Note: PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

Step 1a

Chapter 2 of 6

Step 1a

Chapter 3 of 6

Step 1b

Chapter 4 of 6

Step 2

Chapter 5 of 6

Step 3

Was this helpful?
← PreviousNext chapter →
Staff sign-in