PUREMounts

Read this installation manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

• Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
• This mounting bracket was designed to be installed and exclusively used for the indicated intended use. Any other use is prohibited and will void the warranty.
• The manufacturer will accept no responsibility or liability for damage caused by incorrect mounting, incorrect assembly or incorrect use.
• All screws should be tightened securely and checked regularly, as brackets can loosen over time. DO NOT overtighten.
• Make periodic inspection of the bracket for signs of fatigue or failure. If found, IMMEDIATELY remove the bracket and contact your local supplier.
• Do not use this product for any purpose not explicitly specified by manufacturer.
• Maintenance: Clean the brackets with a soft cloth; do not use harsh chemicals or abrasive materials.

Note: IMPORTANT: Ensure that the mounting surface is suitable and of a construction able to support the full load (including bracket and projector). If you have any doubts, contact a qualified professional.

For further information and for support, please refer to your distributor or contact the manufacturer directly.

PM-SPIDER-40W

20kg (44lbs) RATED
PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

Projector mount illustration
2-1, 2-2, 2-3 assembly sequence diagrams
2-4, 2-5 mounting and adjustment sequence diagrams

Step 1

• A (x1)
• B (x1)

Step 2a

• C (x1)
• D (x1)

Step 2b

• E (x1)
• M5x10 (x6) M-A

Step 3

• M5x10 (x6) M-B
• M5x8 (x4) M-C

Step 4

• M4x8 (x4) M-D
• M3x8 (x4) M-E

• D3 (x4) M-F
• D4 (x4) M-G

Step 5

• D5 (x4) M-H
• D5 (x24) M-H
• D6 (x1) M-I
• M-K (x1)
• M-L (x1)
• M-M (x2)
• W-A (x4)
• W-B (x4)
• W-C (x4)

Legal & Compliance

Product identification

Model: PM-SPIDER-40W – manual version 1.0

Warranty and liability

The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

EU conformity

PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

The full text of the EU Declaration of Conformity is available at: www.purelink.de

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.