INSTALLATION MANUAL

Vacuum Cleaner Floor Stand

For Dyson V6^®, V7^®, V8^®, V11^® and Dyson Cyclone V10^®
PUREMounts
Illustration of the floor stand with attachment hooks

PM-VAC-00 / PM-VAC-01

PureLink GmbH
Von-Liebig-Str. 10 I 48432 Rheine I Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

EN
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local dealer.

• CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
• Please closely follow the assembly instructions. Improper assembly may result in damage or serious personal injury.
• Ensure the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
• The maximum supporting weight and dimension indicated are only for reference. Please note down your machine information.
• This stand is designed for indoor use ONLY. DO NOT use outdoors.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• Some parts may have sharp edges. To prevent injury, use care when assembling or handling the products.

• Assemble the product on a soft and flat surface to prevent damage to the product and floor/ground.
• IMPORTANT: Before installation, make sure you have received all listed components. If any parts are missing or faulty, contact your place of purchase for a replacement.

MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).

Parts List

• A (x1)
• B (x1)
• C (x4)
• D (x1)
• E (x1)

• F (x2)
• G (x2)
• H (x2)
• I (x6) M5x14
• J (x4) M5x10

• K (x2)
• L (x1)

Step 1

H
I
K

Step 2

1. Do not over tighten the screws.

Step 3

F
C

Step 4

1. 1
2. 2
3. G

Step 5

V10/V11
V6
V7/V8

Legal & Compliance

Product identification

Model: PM-VAC-00 – manual version 1.0

Warranty and liability

The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.