Vacuum Cleaner Floor Stand / PM-VAC-00 / PM-VAC-01

For Dyson V6^®, V7^®, V8^®, V11^® and Dyson Cyclone V10^®
PUREMounts®

PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0

PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

EN

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.

• CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
• Please closely follow the assembly instructions. Improper assembly may result in damage or serious personal injury.
• Because some parts may have sharp edges, it is strongly recommended that you protect yourself with proper safety equipment.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• Tighten screws firmly, but do NOT over tighten. Over tightening can damage the items and greatly reduce their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
• When mounting to a wall or ceiling, make sure the supporting surface will safely support the combined weight of the product and all attached hardware and components.

• Never exceed the maximum load capacity of 6kg (13.2lbs).

Note: Before installation, ensure that all parts are included according to the component checklist. If any parts are missing or faulty, contact your place of purchase for a replacement.

Note: Check that the product is secure and safe to use at regular intervals (at least every three months).

Parts List

Step 1

• H
• I
• K

Step 2

• Do not over tighten the screws.

Step 3

• F

• C

Step 4

• 1
• 2
• G

Step 5

• V10/V11
• V6

• V7/V8
• I

Legal & Compliance

Product identification

Model: PM-VAC-01 – manual version 1.0

Warranty and liability

The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.