PM-VAC-20

For Dyson V6®, V7®, V8®, V11® and Cyclone V10®
PUREMounts

EN
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor or the manufacturer.

• CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
• Please carefully follow the instructions during assembly; any modifications or improper assembly can result in serious personal injury.
• This product should only be installed by professionals.
• Tighten screws firmly but do not over tighten. Over tightening can cause damage to the product, and all attached hardware and components.
• This product is intended for indoor use only. DO NOT install this product outdoors or in a humid environment.
• The stand is intended for vacuum cleaners and for storing their attachments. Never place heavy or sharp things.
• The stand must be placed on a smooth and flat floor. ENSURE THE PRODUCT STANDS STEADY BEFORE USE.
• This product is not a toy. Do not let children play with/near the stand. Keep tools away from children.
• IMPORTANT: Before installation, ensure you have received all parts. Always keep your purchase receipt and product manual.
• If the product is damaged or defective upon receipt or if you find any parts are missing or faulty, contact your place of purchase for further assistance.
• MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).

PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

Diagram of the assembled floor stand

Step 1

Step 2

Step 3

Legal & Compliance

Product identification

Model: PM-VAC-20 – manual version 1.0

Warranty and liability

The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

EU conformity

PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

The full text of the EU Declaration of Conformity is available at: www.purelink.de

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.