Vacuum Cleaner Floor Stand

For Dyson V6^®, V7^®, V8^®, V11^® and Cyclone V10^®

EN

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local dealer.

• CAUTION: Use caution when handling or moving the stand weights indicated may result in instability causing possible injury.
• Please always ensure that the stand is safely installed, failure to comply with the instructions could result in accident or injury.

• Ensure that the floor you set the stand on is structurally sound, level and strong enough to support the combined load of the equipment and hardware and components.
• Take care when assembling the product and DO NOT OVER-TIGHTEN any fittings, this may cause personal injury and product damage.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
• Only use this product for its intended purpose. Improper use may result in property damage or personal injury.
• Do not assemble if parts are missing or damaged. Replacement parts may be obtained by contacting your local dealer. If any parts are missing or faulty, contact your place of purchase for a full replacement.

Note: Check you have all components before assembly. Retain instructions for future reference.

Note: MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).

Drawing of vacuum cleaner floor stand

PM-VAC-21

PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0

PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

Step 1

Step 2

Step 3

Legal & Compliance

Product identification

Model: PM-VAC-21 – manual version 1.0

Warranty and liability

The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

EU conformity

PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

The full text of the EU Declaration of Conformity is available at: www.purelink.de

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.