Safety precautions

• Unpack the equipment carefully and save the original box and packing material for possible future shipment
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of extrusion.
• Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with fine ventilation to avoid damage caused by overheating.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrap devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Product Introduction

The PT-C-CPDHU-18G is a 4K USB-C EDID HDCP Manager, USB-C input supports 4K60 (4:4:4), HDMI output support 5m long distance driver, extra PD port for USB-C charging with included 100W PD power supply with locking connector. The USB-A port can connect with USB3.2 devices, plug and play.

Feature

• USB-C video 18Gbps (4K 60Hz 4:4:4) to HDMI 2.0 conversion
• Integrated signal re-timer - up to 2.00m USB-C input, 5.00m HDMI output cable
• Integrated EDID and HDCP management
• Support USB3.2 devices
• Professional, mountable and semi user-facing ProAV housing design

Package List

• 1 x PT-C-CPDHU-18G
• 4 x Mounting ears (with locking screws)
• 4 x Rubber feet
• 1 x Manual

Note: Please contact your distributor immediately if any damage or defect in the components are found

Panel Description

Specification

EDID Management

HDCP Management

4-PIN DIP Switch: 0001(Default) – EDID passthrough, Passive HDCP

System Diagram

Supported Resolution

• 4096x2160@60Hz RGB 8bit
• 4096x2160@60Hz 4:2:2 8bit
• 4096x2160@60Hz 4:2:0 10bit
• 4096x2160@60Hz 4:2:0 12bit
• 3840x2160@60Hz 4:4:4 8bit
• 3840x2160@60Hz 4:2:2 8bit
• 3840x2160@60Hz 4:2:0 8bit
• 3840x2160@60Hz 4:2:0 10bit
• 3840x2160@60Hz 4:2:0 12bit
• 3840x2160@30Hz RGB 8bit
• 3840x2160@30Hz RGB 10bit
• 3840x2160@30Hz RGB 12bit
• 3840x2160@30Hz 4:4:4 8bit
• 1080p@60Hz 4:4:4 12bit
• 1080p@60Hz 4:2:2 8bit
• 1080p@60Hz 4:4:4 8bit
• 1080p@60Hz RGB 8bit
• 1080p@60Hz RGB
• 1080p@60Hz
• 1080p@30Hz
• 1920x1200
• 3840x2160@60Hz 4:2:2 8bit
• 3840x2160@30Hz
• 2560X1440@60Hz

After-Sales Service

If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.

• Product Limited Warranty: This product will be free from defects in materials and workmanship for three years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
• What the warranty does not cover (servicing available for a fee):
• Warranty expiration.
• Factory applied serial number has been altered or removed from the product.
• Damage, deterioration or malfunction caused by:
• Normal wear and tear.
• Use of supplies or parts not meeting our specifications.
• No certificate or invoice as the proof of warranty.
• The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
• Damage caused by force majeure.
• Servicing not authorized by distributor.
• Any other causes which does not relate to a product defect.
• Delivery, installation or labor charges for installation or setup of the product.

Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.

Asking for Assistance

Technical Support:

Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99

Technical Support Hours:

8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday

Write to:

PureLink GmbH
Von-Liebig-Straße 10 D - 48432 Rheine
www.purelink.de

Legal & Compliance

Product identification

Model: PT-C-CPDHU-18G – manual version 1.0

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

Disposal of electrical and electronic equipment

WEEE reg. no.: DE 93847290

The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.