Safety Precautions

To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.

• Unpack the equipment carefully and save the original box and packing material for possible future shipment
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of extrusion.
• Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with fine ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Product Introduction

Introduction

The PT-HDBT-100P-TX is an HDBaseT transmitter that can extend an HDMI signal up to 70 meters via a single Cat 5e/6 cable. The PT-HDBT-100P-TX also boasts a unique PoC on/off switch for increased compatibility. This feature, combined with RS-232 signal pass-through, makes it ideal for direct connection to HDBaseT equipped projectors. When used with an HDBaseT receiver, it can easily remotely control the source device or display device via bi-directional IR signal pass-through. This product can be widely used in video conference systems, educational environments or for any other form of commercial HDMI signal extension.

Features

• HDMI 1.4 and HDCP 2.2 compliant
• Support video resolution up to 4K@30Hz (4:4:4), 10.2Gbps maximum video bandwidth
• Extends 1080p up to 70m and 4K up to 40m (3840 x 2160 @30Hz 4:4:4, 4096 x 2160 @24Hz 4:4:4, and 4K @60Hz 4:2:0).
• Bi-directional 12V PoC (Power over Cable)
• PoC on/off switch to enable or disable PoC function
• Bi-directional IR and RS-232 control signal pass-through
• Compact design for easy and flexible installation

Package List

• 1 × HDMI 70M HDBaseT Extender (Transmitter)
• 1 × Power adaptor (12V DC,1A)
• 2 × Mounting ears
• 1 × 3-pin Phoenix connectors
• 1× User Manual

Panel Description

Note: Please contact your distributor immediately if any damage or defect in the components is found.

Specification

IR Pin Definition

Recommended IR Receiver and Blaster pin’s definition as below:

Note: The frequency of the blaster and receiver component and the pin out of the IR cables is 20-60KHz.

System Diagram

The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

• Make sure all components and accessories included before installation.
• System should be installed in a clean environment with proper temperature and humidity.
• All of the power switches, plugs, sockets, and power cords should be insulated and safe.
• All devices should be connected before power on

The following diagrams illustrate typical input and output connections that can be utilized with this transmitter:

Application 1<br>Projector with RS-232 control Example (PoC OFF)

Application 2<br>Bidirectional IR control Example (PoC ON)

Application 3<br>Bidirectional RS-232 control Example

After-Sales Service

If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.

Product Limited Warranty: This product will be free from defects in materials and workmanship for three years(The purchase invoice shall prevail).

What the warranty does not cover (servicing available for a fee):

• Warranty expiration.
• Factory applied serial number has been altered or removed from the product.
• Damage, deterioration or malfunction caused by:
• Normal wear and tear.
• Use of supplies or parts not meeting our specifications
• No certificate or invoice as the proof of warranty.
• The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
• Damage caused by force majeure.
• Servicing not authorized
• Any other causes which does not relate to a product defect
• Delivery, installation or labor charges for installation or setup of the product

Technical Support:

For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.

Asking for Assistance

Technical Support:

• Phone: +49 5971 800299
• Fax: +49 5971 800299

Technical Support Hours:

• 8:30 AM to 5:00 PM Monday thru Thursday
• 8:30 AM to 4:00 PM Friday

Write to:

PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de

Legal & Compliance

Product identification

Model: PT-HDBT-100P-TX – manual version 1.0

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

EU conformity

PureLink hereby declares that this product PureTools PT-HDBT-100P-TX complies with Directives 1907/2006/EU und 2011/65/EU. PureLink GmbH hereby declares that this product PureTools PT-HDBT-100P-TX complies with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU Declaration of Conformity is available at: http://www.purelink.de/ce/4251364736807_CE.pdf

FCC

Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.

Disposal of electrical and electronic equipment

WEEE reg. no.: DE 93847290

The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.