← Products
HDBaseT 3.0 HDMI and USB 2.0 Receiver
Active

PT-HDBT-1020HU-RX

HDBaseT 3.0 HDMI and USB 2.0 Receiver

The PT-HDBT-1020HU-RX is a professional-grade HDBaseT 3.0 receiver that supports uncompressed 4K (60Hz 4:4:4) HDMI video, USB 2.0 devices through three USB-A and one USB-C ports, audio de-embedding, ARC/eARC, and …

ManualSpecificationsDatasheetCE declaration ↗
Chapter 1 of 7

Safety precautions

  • Unpack the equipment carefully and save the original box and packing material for possible future shipment
  • Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
  • Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
  • Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
  • Refer all servicing to qualified service personnel.
  • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
  • Do not put any heavy items on the extension cable in case of extrusion.
  • Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
  • Install the device in a place with fine ventilation to avoid damage caused by overheat.
  • Keep the module away from liquids.
  • Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
  • Do not twist or pull by force ends of the optical cable. It can cause malfunction.
  • Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
  • Unplug the power cord when left unused for a long period of time.
  • Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.
Chapter 2 of 7

Product Introduction

Introduction

The PT-HDBT-1020HU-RX is an uncompressed 18G HDBaseT3.0 receiver that allows signal transmission up to 100m at 4K@60Hz/ 1080p@60Hz via CAT6A cable. The receiver features one HDMI output, one HDBT input and 4 USB 2.0 ports for connecting with KVM devices such as camera, speakphone, keyboard and mouse.
N.B. HDBaseT 3.0 recommends Category 6a U/FTP as the minimally acceptable cable spec required to achieve its full capabilities and potential.

Feature

  • Supports HDMI 2.0b, 4K@60Hz 4:4:4, HDCP 2.2 compliant.
  • Supports to transmit 4K/1080p signal up to 100m.
  • Supports bi-directional 24V PoC power supply.
  • 4 USB 2.0 ports for connecting with KVM device, Max 272Mbps via Valens.

Package List

  • 1x Transmitter
  • 2 x mounting ears &2x screws
  • 1 x Manual

Note: Please contact your distributor immediately if any damage or defect in the components is found.

Chapter 3 of 7

Panel Description

No.NameDescription
①HDMI OUTConnects to the HDMI display
②DEVICE4 USB 2.0 Ports for connecting KVM device.
③HDBT INConnects to the HDBT OUT port of the transmitter by a CATx cable.
④DC24VDC connector for the power adapter connection.
⑤Power LedThe LED illuminates green when the power is connected
Chapter 4 of 7

Specification

Receiver
Video
Input(1)HDBT IN
Input Connector(1) RJ45
Input ResolutionUp to 4K@60Hz 4:4:4
Output(1) HDMI OUT
Output Connector(1) Type-A female HDMI
Output ResolutionUp to 4K@60Hz 4:4:4
Control
Control Part(4) DEVICE, (1) HOST, (1) ARC Switch, (1) USB Switch, (1) IR IN, (1) IR OUT, (1) RS232, (1) ETHERNET
Control Connector
Port 1&2Type-A USB 2.0 5V500mA Power Supply
Port 3Type-A USB 2.0 5V1A Power Supply
Port 4Type-C USB 2.0 5V1A Power Supply
General
HDCP VersionOutput (TX IN → RX OUT): HDCP 2.2 → HDCP 2.2: HDCP 2.2, HDCP 1.4: NO IMAGE, NO HDCP: NO IMAGE; HDCP 1.4 → HDCP 2.2: HDCP 2.2, HDCP 1.4: HDCP 1.4, NO HDCP: NO IMAGE; NO HDCP → HDCP 2.2: NO HDCP, HDCP 1.4: NO HDCP, NO HDCP: NO HDCP
PoCSupported bi-directional 24V PoC
HDMI V2.0 Cable Length4K@60Hz 4:4:4 ≤ 5m, 4K@60Hz 4:2:0 ≤ 15m, 1080P ≤ 20m
USB DataMax up to 272 Mbps
Transmission Distance4K/1080p ≤ 328 feet (100 meters)
Operation Temperature-5 to +55℃(+23° to +131°F)
Storage Temperature-25 to +70℃(-13° to +158°F)
Relative Humidity10% to 90%, Non-condensing
Power SupplyInput:100V~240V AC; Output:24V DC 1.25A
Power Consumption13.8 W
Dimension (W*H*D)90 x 21.7 x 120 mm
Net Weight265g
Chapter 5 of 7

System Diagram

The following diagram illustrates typical input and output connections that can be utilized with the KVM extener.

Chapter 6 of 7

After-Sales Service

If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.

  1. Product Limited Warranty: This product will be free from defects in materials and workmanship for three years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
  2. What the warranty does not cover (servicing available for a fee):
  • Warranty expiration.
  • Factory applied serial number has been altered or removed from the product.
  • Damage, deterioration or malfunction caused by:
  • Normal wear and tear.
  • Use of supplies or parts not meeting our specifications.
  • No certificate or invoice as the proof of warranty.
  • The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
  • Damage caused by force majeure.
  • Servicing not authorized by distributor.
  • Any other causes which does not relate to a product defect.
  • Delivery, installation or labor charges for installation or setup of the product.
  1. Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.

Asking for Assistance

Technical Support:
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99

Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday

Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de

Was this helpful?
← PreviousNext chapter →
Staff sign-in