Safety precautions
- Unpack the equipment carefully and save the original box and packing material for possible future shipment
- Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
- Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
- Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
- Refer all servicing to qualified service personnel.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
- Do not put any heavy items on the extension cable in case of extrusion.
- Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
- Install the device in a place with fine ventilation to avoid damage caused by overheat.
- Keep the module away from liquids.
- Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
- Do not twist or pull by force ends of the optical cable. It can cause malfunction.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
- Unplug the power cord when left unused for a long period of time.
- Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.
Product Introduction
Introduction
The PT-HDBT-1020HU-RX is an uncompressed 18G HDBaseT3.0 receiver that allows signal transmission up to 100m at 4K@60Hz/ 1080p@60Hz via CAT6A cable. The receiver features one HDMI output, one HDBT input and 4 USB 2.0 ports for connecting with KVM devices such as camera, speakphone, keyboard and mouse.
N.B. HDBaseT 3.0 recommends Category 6a U/FTP as the minimally acceptable cable spec required to achieve its full capabilities and potential.
Feature
- Supports HDMI 2.0b, 4K@60Hz 4:4:4, HDCP 2.2 compliant.
- Supports to transmit 4K/1080p signal up to 100m.
- Supports bi-directional 24V PoC power supply.
- 4 USB 2.0 ports for connecting with KVM device, Max 272Mbps via Valens.
Package List
- 1x Transmitter
- 2 x mounting ears &2x screws
- 1 x Manual
Note: Please contact your distributor immediately if any damage or defect in the components is found.
Panel Description
| No. | Name | Description |
|---|---|---|
| ① | HDMI OUT | Connects to the HDMI display |
| ② | DEVICE | 4 USB 2.0 Ports for connecting KVM device. |
| ③ | HDBT IN | Connects to the HDBT OUT port of the transmitter by a CATx cable. |
| ④ | DC24V | DC connector for the power adapter connection. |
| ⑤ | Power Led | The LED illuminates green when the power is connected |

Specification
| Receiver | |
|---|---|
| Video | |
| Input | (1)HDBT IN |
| Input Connector | (1) RJ45 |
| Input Resolution | Up to 4K@60Hz 4:4:4 |
| Output | (1) HDMI OUT |
| Output Connector | (1) Type-A female HDMI |
| Output Resolution | Up to 4K@60Hz 4:4:4 |
| Control | |
| Control Part | (4) DEVICE, (1) HOST, (1) ARC Switch, (1) USB Switch, (1) IR IN, (1) IR OUT, (1) RS232, (1) ETHERNET |
| Control Connector | |
| Port 1&2 | Type-A USB 2.0 5V500mA Power Supply |
| Port 3 | Type-A USB 2.0 5V1A Power Supply |
| Port 4 | Type-C USB 2.0 5V1A Power Supply |
| General | |
| HDCP Version | Output (TX IN → RX OUT): HDCP 2.2 → HDCP 2.2: HDCP 2.2, HDCP 1.4: NO IMAGE, NO HDCP: NO IMAGE; HDCP 1.4 → HDCP 2.2: HDCP 2.2, HDCP 1.4: HDCP 1.4, NO HDCP: NO IMAGE; NO HDCP → HDCP 2.2: NO HDCP, HDCP 1.4: NO HDCP, NO HDCP: NO HDCP |
| PoC | Supported bi-directional 24V PoC |
| HDMI V2.0 Cable Length | 4K@60Hz 4:4:4 ≤ 5m, 4K@60Hz 4:2:0 ≤ 15m, 1080P ≤ 20m |
| USB Data | Max up to 272 Mbps |
| Transmission Distance | 4K/1080p ≤ 328 feet (100 meters) |
| Operation Temperature | -5 to +55℃(+23° to +131°F) |
| Storage Temperature | -25 to +70℃(-13° to +158°F) |
| Relative Humidity | 10% to 90%, Non-condensing |
| Power Supply | Input:100V~240V AC; Output:24V DC 1.25A |
| Power Consumption | 13.8 W |
| Dimension (W*H*D) | 90 x 21.7 x 120 mm |
| Net Weight | 265g |
After-Sales Service
If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.
- Product Limited Warranty: This product will be free from defects in materials and workmanship for three years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
- What the warranty does not cover (servicing available for a fee):
- Warranty expiration.
- Factory applied serial number has been altered or removed from the product.
- Damage, deterioration or malfunction caused by:
- Normal wear and tear.
- Use of supplies or parts not meeting our specifications.
- No certificate or invoice as the proof of warranty.
- The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
- Damage caused by force majeure.
- Servicing not authorized by distributor.
- Any other causes which does not relate to a product defect.
- Delivery, installation or labor charges for installation or setup of the product.
- Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.
Asking for Assistance
Technical Support:
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99
Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de
Legal & Compliance
Product identification
Model: PT-HDBT-1020HU-RX – manual version 1.0
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
EU conformity
PureLink hereby declares that this product PureTools PT-HDBT-1020HU-RX complies with Directives 1907/2006/EU und 2011/65/EU. PureLink GmbH hereby declares that this product PureTools PT-HDBT-1020HU-RX complies with Directives 2014/30/EU and 2014/35/EU.
| Directive / Regulation |
|---|
| 1907/2006/EU |
| 2011/65/EU |
| 2014/30/EU |
| 2014/35/EU |
The full text of the EU Declaration of Conformity is available at: http://www.purelink.de/ce/
FCC
FCC FCC FCC FCC Statement It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Disposal of electrical and electronic equipment
WEEE reg. no.: DE 93847290
The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.

