Safety Precautions

• Unpack the equipment carefully and save the original box and packing material for possible future shipment.
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of protrusion.
• Do not remove the housing of the device as opening or removing the housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with sufficient ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes

Product Introduction

Thank you for choosing the PT-HDBT-230-RX 18G receiver which is designed to receive 4K video at distances of up to 70 meters and 1080P video at distances up to 100 meters over a single CATx cable. It supports de-embedded audio, ARC, bidirectional IR and RS232 pass-through. PoC allows the receiver to be powered from other devices with only one power adapter is needed in system.

Features

• Supports HDMI 2.0 and the HDMI video resolution up to 4K@60Hz 4:4:4 HDR.
• Extends 4K signals to distances up to 70 meters and 1080P signals to distances up to 100 meters over a single CATx cable.
• Supports video resolution up-scaling, the 1080P input can be automatically upgraded to 4K output.
• SPDIF out on receiver for source audio de-embedding.
• 18Gbps high bandwidth.
• Bidirectional IR, RS232 and 24V PoC.
• Supports ARC.
• Supports CEC pass-through.
• Provides LEDs to indicate the current operating status.
• Firmware upgrade by Micro-USB port.

Packing List

• 1x PT-HDBT-230-RX Receiver
• 2x Mounting Ears with 4 Screws
• 4x Plastic Cushions
• 1x 3-pin Terminal Block
• 1x User Manual

Note: Please contact your distributor immediately if any damage or defect in the components is found.

Panel Description

ARC Mode

The front panel of the receiver provides a buttons to enable or disable ARC mode, as below figure shows:

Press the button with paper clip or other sharp tool to enable the ARC mode, and then the left LED illuminates blue. Press it again to exit the ARC mode and the LED will turn off.

Note: If the ARC mode is ON, the Audio Breakout port of receiver has no audio output.

System Connection

The following diagram illustrates the typical input and output connections of the extender:

1. The ARC mode of the receiver is ON, and the display device (e.g. HDTV) supports ARC. The TV audio is transmitted from the TV back to the receiver via an HDMI cable, and then it will output at the ARC Audio Out port of the transmitter.

1. The ARC mode of receiver is ON, but the display device (e.g. HDTV) doesn’t support ARC. The TV audio is transmitted from the TV back to the receiver via the audio cable, and then it will output at the ARC Audio Out port of the transmitter.

Note: The S/FTP cable is recommended to be used to ensure optimal machine performance in ARC mode.

1. The ARC mode of receiver is OFF. The TV audio can’t go back to the ARC Audio Out port of the transmitter. The Audio Breakout port of receiver is connected to speaker or amplifier for HDMI source audio de-embedding.

Technical Specification

Video

Audio

Control

General

Note: Please use high-quality HDMI cables, fully compliant with HDMI 2.0 for a reliable transmission and connection.

After-Sales Service

If problems appear when using the product, please deal with the problems referring to this user manual. During the warranty period, any transport costs are borne by the customer.

1. Product Limited Warranty: The product will be free from defects in materials and workmanship for three years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
2. What the warranty does not cover (servicing available for a fee):
3. Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.

• Warranty expiration.
• Factory applied serial number has been altered or removed from the product.
• Damage, deterioration or malfunction caused by:
• Normal wear and tear.
• Use of supplies or parts not meeting our specifications.
• No certificate or invoice as the proof of warranty.
• The product model shown on the warranty card does not match with the model of the product for repairing or had been altered.
• Damage caused by force majeure.
• Servicing not authorized by distributor.
• Any other causes which does not relate to a product defect.
• Delivery, installation or labor charges for installation or setup of the product.

Asking for Assistance

Technical Support

Write to

PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de

Legal & Compliance

Product identification

Model: PT-HDBT-230-RX – manual version 1.0

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

FCC

Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.

Disposal of electrical and electronic equipment

WEEE reg. no.: DE 93847290

The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.