Safety precautions
To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material for possible future shipment. Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
- Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
- Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
- Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
- Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
- Do not twist or pull by force ends of the optical cable. It can cause malfunction.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
- Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.
- Unplug the power cord when left unused for a long period of time.
- Keep the module away from liquids.
- Install the device in a place with fine ventilation to avoid damage caused by overheat.
- Do not put any heavy items on the extension cable in case of extrusion.
- Refer all servicing to qualified service personnel.
Product Introduction
Introduction
This 8K HDMI 1x2 Splitter can distribute one HDMI source signal to any two display devices. It supports data rate up to 48Gbps, and video resolution 8K@60Hz 4:2:0 12bit compliant. It has advanced EDID management and audio de-embedding function (output through the optical and analog port). This multi-functional product can work well with xbox or PS5 to achieve 4K@120Hz video resolution on your TVs or relative monitors.
Features
- HDMI 2.1 and HDCP 2.3 compliant
- Supports 48Gbps FRL and 18Gbps TMDS video bandwidth
- VRR, FVA, ALLM supported
- Supports HDR, HDR10, HDR10+, Dolby Vision, HLG pass through
- Supports HDMI audio formats: LPCM 7.1CH, Dolby TrueHD, Atmos, DTS-HD Master Audio
- Advanced EDID management
- Supports resolution auto downscaling and converting on each output port
- Supports audio de-embedding function (output through the optical and analog port)
- Supports video resolution up to 8K@60Hz 4:2:0 12-bit, 4K@120Hz 4:4:4 12-bit
Package List
- 1 × 8K HDMI 1x2 Splitter
- 4 × Machine Screw (KM3*4)
- 1 × 5V/2A Multinational Power Supply
- 1 × User Manual
- 2 × Mounting Ear
Panel Description
HDCP CEC IN EDID SERVICE OUT 1 OUT 2 DC 5V IN OUT 1 OUT 2 L/R OPTICAL 1 2 3 7 8 9 10 11 4 5 6
| No. | Name | Function Description |
|---|---|---|
| 1 | Power LED | The power LED lights in red when the device is working. |
| 2 | IN LED | When the HDMI IN port connects an active source device, the green LED will be on. |
| 3 | OUT LED (1~2) | When the HDMI OUT 1/2 port connects a display device and outputs signal, the corresponding green LED will be on. |
| 4 | HDCP DIP switch | Use this DIP switch to set HDCP. 1 - Pass-through mode: The output HDCP follows the source. 0 - Managed mode: If the source has HDCP, the output will be set to HDCP 1.4; if the source has no HDCP, the output will be set to no HDCP. |
| 5 | CEC DIP switch | Use this DIP switch to enable or disable CEC. 1 - CEC disable: Prevent CEC communication between source and sink devices. 0 - CEC enable: Allow CEC communication between source and sink devices. |
| 6 | EDID DIP switch | Use the DIP switch to set EDID. [DIP]=1111: Copy OUT1 port sink EDID [DIP]=1110: FRL12G_8K_HDR,2.0CH [DIP]=1101: FRL12G_8K_HDR,5.1CH [DIP]=1100: FRL12G_8K_HDR,7.1CH [DIP]=1011: FRL10G_8K_HDR,2.0CH [DIP]=1010: FRL10G_8K_HDR,5.1CH [DIP]=1001: FRL10G_8K_HDR,7.1CH [DIP]=1000: 4K120(420)_HDR,2.0CH [DIP]=0111: 4K120(420)_HDR,5.1CH [DIP]=0110: 4K120(420)_HDR,7.1CH [DIP]=0101: 1080P120(444)_HDR,2.0CH [DIP]=0100: 1080P120(444)_HDR,5.1CH [DIP]=0011: 1080P120(444)_HDR,7.1CH [DIP]=0010: 4K60(444)_HDR,2.0CH [DIP]=0001: 4K60(444)_HDR,5.1CH [DIP]=0000: 4K60(444)_HDR,7.1CH |
| 7 | SERVICE | Firmware update and debug port. |
| 8 | IN port | HDMI signal input port, connecting to HDMI source device such as DVD or PS5 with an HDMI cable. |
| 9 | OUT port (1~2) | HDMI signal output port, connecting to HDMI display device such as TV or Monitor with an HDMI cable. |
| 10 | OPTICAL | Optical fiber audio output port. |
| 11 | L/R | Analog audio output port. |
| 12 | DC 5V | DC 5V/2A Power input port. |
Specification
| Technical |
|---|
| HDMI Compliance HDMI 2.1 |
| HDCP Compliance HDCP 2.3 |
| Video Bandwidth 48Gbps |
| Video Resolution Up to 8K@60Hz 4:2:0 12bit, 8K@30Hz 4:4:4 12bit, 4K@120Hz 4:4:4 12bit |
| Color Depth 8/10/12-bit |
| Color Space RGB, YCbCr 4:4:4 / 4:2:2. YUV 4:2:0 |
| Audio Format HDMI input/output: LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD Audio de-embedding output: Optical: LPCM 2/5.1 CH, Dolby Digital 2/5.1 CH, DTS 2/5.1 CH Analog: PCM 2.0 |
| ESD Protection Human body model — ±8kV (air-gap discharge) & ±4kV (contact discharge) |
| Connection |
| Input 1 × HDMI IN [Type A, 19-pin female] |
| Outputs 2 × HDMI OUT [Type A, 19-pin female] 1 × OPTICAL [S/PDIF] 1 × L/R [3.5mm Stereo Mini-jack] |
| Control 1 × SERVICE [USB Type C, Update port] |
| Mechanical |
|---|
| Housing Metal Enclosure |
| Color Black |
| Dimensions 145mm(W) × 68mm(D) × 17mm(H) |
| Weight 262g |
| Power Supply |
| Input AC 100 - 240V 50/60Hz |
| Output DC 5V/2A (US/EU standards, CE/FCC/UL certified) |
| Power Consumption 4.5W (Max) |
| Operation Temperature 32 ~ 104°F / 0 ~ 40°C |
| Storage Temperature -4 ~ 140°F / -20 ~ 60°C |
| Relative Humidity 20 ~ 90% RH (No condensation) |
Recommended HDMI Cable
| Video Resolution | 8K | 4K60 | 4K24 | 1080P |
|---|---|---|---|---|
| HDMI Cable Type | Ultra HDMI 2.1 | HDMI 2.0 | HDMI 1.4 | HDMI 1.4 |
| HDMI Cable Length (HDMI IN / OUT) | 3m/10ft | 8m/26ft | 12m/39ft | 15m/49ft |
Note: The use of “Premium High Speed HDMI” cable is highly recommended.
* All the input/output resolution supported list is as follows:
| No. | Resolution | No. | Resolution |
|---|---|---|---|
| 1 | 640x480p60Hz | 2 | 800x600p60Hz |
| 3 | 1024x768p60Hz | 4 | 1280x1024p60Hz |
| 5 | 1360x768p60Hz | 6 | 1440x900p60Hz |
| 7 | 1440x1050p60Hz | 8 | 1600x1200p60Hz |
| 9 | 720x480i59.94Hz (480i59) | 10 | 720x480p59.94Hz (480p59) |
| 11 | 720x576i50Hz (576i50) | 12 | 720x576p50Hz (576p50) |
| 13 | 1280x720p50Hz (720p50) | 14 | 1280x720p59.94Hz (720p59) |
| 15 | 1280x720p60Hz (720p60) | 16 | 1920x1080i50Hz (1080i50) |
| 17 | 1920x1080i59.94Hz (1080i59) | 18 | 1920x1080i60Hz (1080i60) |
| 19 | 1920x1080p23.98Hz (1080p23) | 20 | 1920x1080p24Hz (1080p24) |
| 21 | 1920x1080p25Hz (1080p25) | 22 | 1920x1080p29.97Hz (1080p29) |
| 23 | 1920x1080p30Hz (1080p30) | 24 | 1920x1080p50Hz (1080p50) |
| 25 | 1920x1080p59.94Hz (1080p59) | 26 | 1920x1080p60Hz (1080p60) |
| 27 | 3840x2160p23.98Hz (2160p23) | 28 | 3840x2160p24Hz (2160p24) |
| 29 | 3840x2160p25Hz (2160p25) | 30 | 3840x2160p29.97Hz (2160p29) |
| 31 | 3840x2160p30Hz (2160p30) | 32 | 3840x2160p50Hz (2160p50) |
| 33 | 3840x2160p59.94Hz (2160p59) | 34 | 3840x2160p60Hz (2160p60) |
| 35 | 3840x2160p100Hz (2160p100) | 36 | 3840x2160p120Hz (2160p120) |
| 37 | 4096x2160p23.98Hz | 38 | 4096x2160p24Hz |
| 39 | 4096x2160p25Hz | 40 | 4096x2160p29.97Hz |
| 41 | 4096x2160p30Hz | 42 | 4096x2160p50Hz |
| 43 | 4096x2160p59.94Hz | 44 | 4096x2160p60Hz |
| 45 | 4096x2160p100Hz | 46 | 4096x2160p120Hz |
| 47 | 5120x2160p50Hz | 48 | 5120x2160p60Hz |
| 49 | 7680x4320p23.98Hz | 50 | 7680x4320p24Hz |
| 51 | 7680x4320p25Hz | 52 | 7680x4320p29.97Hz |
| 53 | 7680x4320p30Hz | 54 | 7680x4320p50Hz |
| 55 | 7680x4320p60Hz (4:2:0) |
Auto Downscaling & Auto Converting
This 8K HDMI splitter supports auto downscaling and auto converting on all outputs. Before downscaling it will compare all the EDID of the connected display devices and select the minimum resolution to downscale and output. For example:
8K HDR Bypass
8K Source → 8K HDR TV
8K HDR Splitter → 4K SDR TV
4K SDR Downscaling & Converting
8K HDR Downscaling & Converting
8K Source → Splitter → 4K HDR TV
1080P SDR TV
1080P SDR Downscaling & Converting
1080P SDR
4K HDR Downscaling & Converting
4K Source → Splitter → 8K HDR TV
1080P SDR TV
1080P SDR
4K HDR Bypass
4K HDR Downscaling & Converting
4K Source → Splitter → 4K HDR TV
1080P DVI
4K HDR Bypass
1080P DVI TV
(No sound)
Downscaling will not work in the following conditions:
- The input source is 8K DSC format.
- The resolution of input source is not supported by the device.
1080P HDR
1080P HDR Bypass
Downscaling & Converting
1080P Source → Splitter → 1080P DVI TV
1080P DVI (No sound)
1080P HDR TV
Note: If the source resolution is downscaled and converted to 1080P DVI according to the EDID of display devices, it will be output without sound on TV.
1080P HDR
1080P HDR Bypass
Downscaling & Converting
1080P Source → Splitter → 4K HDR TV
1080P SDR
1080P SDR TV
System Diagram
The following diagrams illustrate typical input and output connections that can be utilized with this device:
DC 5V IN OUT 1 OUT 2 L/R OPTICAL
DVD or Blu-ray Player
Power Supply
8K TV 1
8K TV 2
Line Level Audio Device
AVR or Amplifier
Usage Precaution
- Make sure all components and accessories included before installation.
- System should be installed in a clean environment with proper temperature and humidity.
- All of the power switches, plugs, sockets, and power cords should be insulated and safe.
- All devices should be connected before power on.
After-Sales Service
If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.
- Product Limited Warranty: This product will be free from defects in materials and workmanship for three years (The purchase invoice shall prevail).
- Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
- Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.
What the warranty does not cover (servicing available for a fee):
- Warranty expiration.
- Factory applied serial number has been altered or removed from the product.
- Damage, deterioration or malfunction caused by:
- Normal wear and tear.
- Use of supplies or parts not meeting our specifications.
- No certificate or invoice as the proof of warranty.
- The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
- Damage caused by force majeure.
- Servicing not authorized by distributor.
- Any other causes which does not relate to a product defect.
- Delivery, installation or labor charges for installation or setup of the product.
Asking for Assistance
Technical Support:
Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99
Website: www.purelink.de
Email: info@purelink.de
Legal & Compliance
Product identification
Model: PT-SP-HD12-48G – manual version 1.0
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
EU conformity
PureLink hereby declares that this product PureTools PT-SP-HD12-48G complies with Directives 1907/2006/EU und 2011/65/EU. PureLink GmbH hereby declares that this product PureTools PT-SP-HD12-48G complies with Directives 2014/30/EU and 2014/35/EU.
| Directive / Regulation |
|---|
| 1907/2006/EU |
| 2011/65/EU |
| 2014/30/EU |
| 2014/35/EU |
The full text of the EU Declaration of Conformity is available at: www.purelink.de
Disposal of electrical and electronic equipment
WEEE reg. no.: DE 93847290
The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.