Laptop Holder
INSTALLATION MANUAL
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Caution: The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced.
Note: Safety measures must be practiced at all times during the installation of this product. Use proper safety gear and tools for the installation procedure to prevent personal injury.
Note: Prior to the installation of this product, the installation instructions should be read and completely understood. The installation instructions must be read to prevent personal injury and property damage. Keep these installation instructions in an easily accessible location for future reference.
Note: Handle product with care. Do not use defective or damaged parts. Use caution during installation and avoid pinching hands or fingers.
Caution: This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
Tip: Be sure to use all the included hardware as instructed.
Caution: DO NOT OVER TIGHTEN. Over tightening can damage the items, greatly reducing their holding ability.
Note: If you do not understand the instructions or have any concerns or questions, please contact a qualified installer or your local distributor.
IMPORTANT: Check that the bracket is secure and safe to use at regular intervals (at least every three months).
PM-ADAPT-NB
PureLink GmbH
Von-Liebig-Str. 10 I 48432 Rheine I Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
PM-ADAPT-NBW / Step 1
A (x1) B (x1) C (x1)
M-A (x4) M-B (x4) M-C (x4)
A
Step 2
C
Legal & Compliance
Product identification
Model: PM-ADAPT-NB – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.