Tilt Wall Mount
INSTALLATION MANUAL

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
- CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

- SAFETY: Make sure that the intended mounting surface is strong enough to support the product and the attached hardware and components.
- This product should only be installed by professionals. Improper assembly may cause property damage or serious personal injury.
- The mounting hardware supplied is for standard installations only. For special mounting conditions, contact your local distributor.
- The product must be securely fastened to the wall. DO NOT mount onto drywall alone; only mount onto solid wall types.
- Tighten all screws and bolts but DO NOT overtighten. Overtightening can damage the equipment and all attached hardware and components.
- Do not modify or use unauthorized parts. Doing so may cause product failure and personal injury.
- Do not use this product for any purpose not explicitly specified by the manufacturer.
- This product may contain small parts which can be a choking hazard. Keep away from children.
- IMPORTANT: Ensure that you have received all parts according to the enclosed parts list. If any parts are missing or faulty, telephone your local distributor for a replacement.
- MAINTENANCE: Check that the bracket is secure and do so again to be sure at regular intervals (at least twice every few months).
PM-BT400
200x200/300x300/400x200/400x400
26-52” 66-132cm
35kg (77lbs) RATED
PM-BT600
200x200/300x300/400x200/400x400/600x400
32-65” 81-165cm
35kg (77lbs) RATED
PureLink GmbH
Von-Liebig Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
Illustration of Tilt Wall Mount with TV
Step 3
- Lift TV with two people.
- Hang TV and tighten security screws.
Step 4
- Adjust tilt angle from 0° to -14°.
Legal & Compliance
Product identification
Model: PM-BT600 – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.






