← Products
TV Mount - Swivel - Vesa 400
Discontinued

PM-FM11-400

TV Mount - Swivel - Vesa 400

The PureMounts TV Mount - Swivel - Vesa 400 is a black LED/LCD TV wall mount with a stepless, noiseless tilt angle adjustment from 3° to -10° and a swivel range of 90° to -90°, depending on wall distance and screen …

ManualFAQ
PDF / print
Chapter 1 of 9

PM-FM11-400

100x100/200x100
200x200/300x200
300x300/400x200
400x400
32-55” 81-140cm
20kg (44lbs) RATED

PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0

PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

EN

Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

  • Safety measures must be practiced at all times during the installation of this product. Use proper safety gear and tools for the installation procedure to prevent personal injury.
  • This product should be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions.
  • The wall structure must be capable of supporting at least five times the weight of the total installation or reinforced. If not, the wall must be reinforced. See safety warning for more information.
  • Tighten screws firmly, but do NOT OVER TIGHTEN.
  • This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.
  • This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.

Note: Ensure that you have received all parts according to the component checklist (see next page). If any parts are missing or faulty, telephone your local distributor for a replacement. Do not substitute any parts.

Note: Check that the bracket is secure and safe to use at regular intervals (at least every three months).

Parts List

A (x1)
B (x4)

C (x2)
M6x30 (x4) M-A
M8x30 (x4) M-B
M8x50 (x4) M-C
D8 (x4) M-D

M-E (x8)
M-F (x8)
W-A (x3)
W-B (x3)

W-C (x3)

Chapter 2 of 9

Step 1

  • Attach mount A to the wall using screws and wall anchors.
  • Use a screwdriver.
Chapter 3 of 9

Step 2

  • Drill pilot holes as needed.
  • Insert wall anchors (W-A) in drywall. Use W-B and W-C for concrete walls.
  • Do not use power tools for final tightening.
Chapter 4 of 9

Step 3

  • Attach brackets (B) to the main plate.
  • Use wrench as needed.
Chapter 5 of 9

Step 4

  • Optional: Add C as wall spacers if needed.
Chapter 6 of 9

Step 5

  • Choose correct bolts and spacers according to your TV's thickness and screw depth.
  • Use combinations: M-A/M-B with M-D and M-E, M-C with M-D, M-E, and M-F.
Chapter 7 of 9

Step 6

  • Carefully hang the TV with the attached brackets onto the mounted wall arm.
  • Two people recommended.
  • Use a screwdriver to secure and lock the plate.
Chapter 8 of 9

Step 7

  • Adjust viewing angle: 180° rotation, +3° up, -10° down.
Was this helpful?
← PreviousNext chapter →
Staff sign-in