Full Motion LED, LCD TV Wall Mount

INSTALLATION MANUAL
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

Caution: Be sure to have at least two persons for installation.This product supports the following VESA mounting hole patterns: 75x75/100x100/75x100/200x100/200x200 mm.The installation surface must be structurally sound and strong enough to support the combined weight of the mount and the display.For safety reasons, the wall that the mount is attached to must be reinforced concrete, brick or another solid load-bearing wall. Do not install into drywall alone.Before mounting, carefully check the wall structure and select a secure mounting location.The working load of the mount is 36 kg. Do not install a display that exceeds this weight.Do not exceed the maximum supported size for your display. Mount supports displays with a diagonal size between 23-42".Make sure no electrical wires or water pipes are in the installation area. Drilling into these can cause serious injury.Tighten screws firmly but do not over-tighten.Use only parts provided and proven compatible tools for installation.Improper installation may result in product damage or serious personal injury.Mounting hardware provided is only for use on reinforced concrete or solid wall installation. For other wall materials, contact your local distributor for suitable wall anchors.Make sure mount and display are properly secured and periodically check all screws for tightness.PureLink GmbH cannot be held liable for damage or injury caused by incorrect installation, incorrect use or misapplication of the product.

PM-MOTION2-37

75x75/100x100 75x100/200x100 200x200
23-42" 58-107cm
36kg 80lbs RATED

PureLink GmbH Von-Liebig-Str. 10 | 48432 Rheine | Germany Phone: +49 (0) 5971 800 299 0

PureLink GmbH hereby declares that this product complies with Directive 1997/2006/EU and 2011/65/EU.

Step 7 and Step 8 assembly diagrams

Step 7

4mm

Step 8

Step 9 assembly diagram

Step 9

Step 10 illustration of tilt and rotation adjustment

Step 10 / Step 1

Step 2

Step 3a

Step 3b

Step 4

Step 5

Step 6a

M-E M-F M-A M-B M-C M-D

Step 6b

M-G M-F M-G

Legal & Compliance

Product identification

Model: PM-MOTION2-37 – manual version 1.0

Warranty and liability

The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.

The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

EU conformity

PureLink GmbH hereby declares that this product complies with Directive 1997/2006/EU and 2011/65/EU.

The full text of the EU Declaration of Conformity is available at: www.purelink.de

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.