← Products
PureMounts® LCD Mount Tilt & Swivel 37-70"
Discontinued

PM-MOTION4-65S

PureMounts® LCD Mount Tilt & Swivel 37-70"

PureMounts® LCD Mount Tilt & Swivel 37-70".

ManualFAQ
Chapter 1 of 13

INSTALLATION MANUAL

Read all of this instruction manual before you start installation, and keep it carefully. If you have any questions regarding any of the installation or warnings, please contact your local distributor for help.

Caution: • Failure to use the correct hardware or install as instructed may result in injury or damage to product or property.
• This product must be installed on a vertical wall – installation on ceilings or angled walls is strictly prohibited.
• Ensure that the wall you intend to mount to is suitable for supporting the combined weight of the mount and display.
• The TV must always be removed from the mount before making adjustments.
• Tighten screws securely, but do not over-tighten.

Note: • Periodically check all hardware for tightness to ensure the product is safe and secure.
• Not intended for use by children.

IMPORTANT:

  • Ensure that the brackets are securely built to hold a weight far heavier than your TV and check them thoroughly.

Caution: • PURE MOUNTS is not responsible for improper installation and operation, nor for damage arising from products mounted incorrectly or faulty. Malfunction your local distributor is not liable for product damages due to incorrect assembly or mounting of the display.
• When removing TV or lifting for mounting and dismounting, please ensure enough clearance from the wall.
• For any further queries or installation advice, please contact your local distributor.

Chapter 2 of 13

PM-MOTION4-65S

200x200/300x300/400x200/400x400/600x400
37''-77'' 94-178cm

45kg 99lbs RATED
45kg 99lbs RATED

PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
Illustration of the wall mount

Chapter 3 of 13

Step 6

Mount TV to wall bracket with 4 mm gap, check level with spirit level and adjust rotation.
4mm

Chapter 4 of 13

Step 7

Secure the TV to the mount.

Chapter 5 of 13

Step 8

Tighten the safety screws with Allen key.

Chapter 6 of 13

Step 9

Adjust tilt and rotation as needed (-15° to +15°, -3° to +3°).

  • ±20°
  • +15°
  • -15°
  • +3°
  • -3°
Chapter 7 of 13

Step 1

A (x1)
M5×14 (x4) M-A
M6×14 (x4) M-B
M8×30 (x4) M-DM8×50 (x4) M-E
  • M-F (x4)
  • M-G (x8)
  • M-H (x8)
  • W-A (x6)
  • W-B (x6)
  • W-C (x6)
Chapter 8 of 13

Step 2a

Chapter 9 of 13

Step 2b

Chapter 10 of 13

Step 3

Chapter 11 of 13

Step 4

Chapter 12 of 13

Step 5

Step 5a

Step 5b

Was this helpful?
👎 No← PreviousNext chapter →
Chapter: Step 2b · your note is attached to article PM-MOTION4-65S.Cancel
Staff sign-in