INSTALLATION MANUAL
For Sonos One | Sonos One SL | Sonos Play:1
PM-SOM-100
PM-SOM-101
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
Caution: Use only with products heavier than the rated weights indicated may result in instability causing possible injury.
- Do not use this product for any purpose not explicitly specified by manufacturer.
- Improper installation may cause property damage or personal injury.
- This product is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in collapse of the mount and accessories and cause possible injury.
- This product is intended to be mounted to solid concrete walls, solid wood studs, or brick walls. Mounting to other wall materials (e.g. drywall, plywood, etc.) may result in instability.
- Ensure that mounting surface is strong enough to hold mounted load.
- Tighten screws firmly, but do not over tighten. Over tightening can cause damage to components, greatly reducing their holding power.
- Check carefully to make sure that there are no missing or defective parts.
- Never use defective parts. If installation is unclear, contact your dealer.
- Manufacturer cannot be responsible for improper installation.
Note: Check that the product is secure and safe to use regularly (at least every three months).
PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
Step 1
A (x2) B (x2) C (x2) D (x4) E (x4)
F (x2) G (x2) H (x1)
- Remove part from main bracket as shown.
Step 2a
- Mount directly on stud using power drill and screwdriver.
- Do not mount on unsupported drywall.
- Insert screws (E), attach cover (C).
- Only mount on solid surface/stud OR use appropriate fastening.
Step 2b
- Mount on masonry.
- Use power drill, insert wall plugs (D).
- Insert screws (E), attach cover (C).
- Do not use drywall anchors for this type.
Step 3
- Attach bracket (B) to main unit.
- Tighten by inserting and securing with screw (G).
Step 4
- Insert securing screw (F).
- Fix using tool (H).
- Unit can be adjusted: ±45°, ±180°, 0°–20° tilt.
Legal & Compliance
Product identification
Model: PM-SOM-101 – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.