← Products
Speaker Wall Mount for Sonos® One, Sonos® One SL, Sonos® Play1, white
Active

PM-SOM-101

Speaker Wall Mount for Sonos® One, Sonos® One SL, Sonos® Play1, white

The PureMounts Speaker wall mount PM-SOM-101 is designed for Sonos One, Sonos One SL, and Sonos Play:1 and features a steel construction in white. It offers a tilt and swivel mechanism for flexible orientation, a 360° …

ManualFAQ
PDF / print
Chapter 1 of 7

INSTALLATION MANUAL

For Sonos One | Sonos One SL | Sonos Play:1
PM-SOM-100
PM-SOM-101

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.

Caution: Use only with products heavier than the rated weights indicated may result in instability causing possible injury.

  • Do not use this product for any purpose not explicitly specified by manufacturer.
  • Improper installation may cause property damage or personal injury.
  • This product is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in collapse of the mount and accessories and cause possible injury.
  • This product is intended to be mounted to solid concrete walls, solid wood studs, or brick walls. Mounting to other wall materials (e.g. drywall, plywood, etc.) may result in instability.
  • Ensure that mounting surface is strong enough to hold mounted load.
  • Tighten screws firmly, but do not over tighten. Over tightening can cause damage to components, greatly reducing their holding power.
  • Check carefully to make sure that there are no missing or defective parts.
  • Never use defective parts. If installation is unclear, contact your dealer.
  • Manufacturer cannot be responsible for improper installation.

Note: Check that the product is secure and safe to use regularly (at least every three months).

PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0

PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

Chapter 2 of 7

Step 1

A (x2) B (x2) C (x2) D (x4) E (x4)
F (x2) G (x2) H (x1)

  • Remove part from main bracket as shown.
Chapter 3 of 7

Step 2a

  • Mount directly on stud using power drill and screwdriver.
  • Do not mount on unsupported drywall.
  • Insert screws (E), attach cover (C).
  • Only mount on solid surface/stud OR use appropriate fastening.
Chapter 4 of 7

Step 2b

  • Mount on masonry.
  • Use power drill, insert wall plugs (D).
  • Insert screws (E), attach cover (C).
  • Do not use drywall anchors for this type.
Chapter 5 of 7

Step 3

  • Attach bracket (B) to main unit.
  • Tighten by inserting and securing with screw (G).
Chapter 6 of 7

Step 4

  • Insert securing screw (F).
  • Fix using tool (H).
  • Unit can be adjusted: ±45°, ±180°, 0°–20° tilt.
Was this helpful?
← PreviousNext chapter →
Staff sign-in