Safety precautions
To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material for possible future shipment.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
- Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
- Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
- Do not put any heavy items on the extension cable in case of extrusion.
- Refer all servicing to qualified service personnel.
Introduction
This HDMI Extender can extend HDMI signal up to 70m for 1080p@60Hz resolution, and 40m for 4K30 resolution via a single CAT6/6a cable, which can achieve zero-delay, uncompressed long-distance transmission between the transmitter and receiver. This extender supports PoC and remote EDID copy function. Audio formats up to PCM7.1, Dolby True HD, DTS HD Master are also supported. It can be widely used in multi-media conference halls, TV teaching and large-screen displays.
Features
- HDMI 1.4b and HDCP 1.4 compliant
- Video resolution is up to 4K2K@30Hz
- Supports 10.2Gbps video bandwidth
- HDMI signal transmission distance can be extended up to 70m for 1080p@60Hz resolution, and 40m for 4K@30Hz resolution via a single CAT6/6a cable
- HDMI audio formats: PCM7.1, Dolby True HD, DTS HD Master
- Supports bi-directional PoC function
- Compact design for easy and flexible installation
- Supports copying EDID from receiver display
Package List
- 1 × HDMI Transmitter
- 1 × HDMI Receiver
- 1 × 5V/1A Power Supply
- 1 × User Manual
Transmitter Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | IN | HDMI signal input port for connecting the HDMI source device. |
| 2 | LINK LED | When the transmitter is connected to HDMI signal source, the green LINK LED will be on. |
| 3 | CAT OUT | TMDS signal output port, connecting to the CAT IN port on receiver. |
| 4 | Link State Indicator (Green) | ▪ On: Transmitter and receiver are in good connection status. ▪ Flashing: Transmitter and receiver are in poor connection status. ▪ Off: Transmitter and receiver are not connected. |
| 5 | Data State Indicator (Yellow) | ▪ On: HDMI signal with HDCP. ▪ Flashing: HDMI signal without HDCP. ▪ Off: No HDMI signal. |
| 6 | DC 5V | DC 5V power input port. |
| 7 | PWR LED | When the transmitter is powered on, the green Power LED will be on. |
Receiver Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | OUT | HDMI signal output port for connecting the HDMI display device. |
| 2 | LINK LED | When the receiver is connected to HDMI display source, the green LINK LED will be on. |
| 3 | CAT IN | TMDS signal output port, connecting to the CAT OUT port on transmitter. |
| 4 | Link State Indicator (Green) | ▪ On: Transmitter and receiver are in good connection status. ▪ Flashing: Transmitter and receiver are in poor connection status. ▪ Off: Transmitter and receiver are not connected. |
| 5 | Data State Indicator (Yellow) | ▪ On: HDMI signal with HDCP. ▪ Flashing: HDMI signal without HDCP. ▪ Off: No HDMI signal. |
| 6 | DC 5V | DC 5V power input port. |
| 7 | PWR LED | When the receiver is powered on, the green Power LED will be on. |
Specification
| Technical | |
|---|---|
| HDMI Compliance | HDMI 1.4b |
| HDCP Compliance | HDCP 1.4 |
| Video Bandwidth | 10.2Gbps |
| Video Resolution | Up to 4K2K@30Hz |
| HDMI Audio Formats | LPCM 7.1CH, Dolby True HD, and DTS-HD Master |
| Color Depth | 8bit |
| Color Space | RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 |
| Transmission Distance | 70m (for 1080P@60Hz) over CAT 6/6a 40m (for 4K2K@30Hz) over CAT 6/6a |
| Mechanical | |
|---|---|
| Housing | Metal Enclosure |
| Color | Black |
| Dimensions | 90mm (W) × 60mm (D) × 16mm (H) |
| Weight | Transmitter: 46g, Receiver: 47g |
| Power | |
|---|---|
| Supply | Input: AC 100-240V 50/60Hz, Output: DC 5V/1A (US/EU standard, CE/FCC/UL certified) |
| Power Consumption | 3.45W (Max) |
| Operation | |
|---|---|
| Temperature | 32 ~ 104°F / 0 ~ 40°C |
| Storage Temperature | -4 ~ 140°F / -20 ~ 60°C |
| Relative Humidity | 20 ~ 90% RH (no condensation) |
- ESD Protection: Human body model — ±8kV (air-gap discharge) & ±4kV (contact discharge)
| Connection | |
|---|---|
| Transmitter | Input: 1×HDMI IN [Type A, 19-pin female] Output: 1×CAT OUT [RJ45 connector] |
| Receiver | Input: 1×CAT IN [RJ45 connector] Output: 1×HDMI OUT [Type A, 19-pin female] |
System Diagram
The following diagrams illustrate typical input and output connections that can be utilized with this device:
Usage Precaution
- Make sure all components and accessories included before installation.
- System should be installed in a clean environment with proper temperature and humidity.
- All of the power switches, plugs, sockets, and power cords should be insulated and safe.
- All devices should be connected before power on.
After-Sales Service
If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.
- Product Limited Warranty: This product will be free from defects in materials and workmanship for three years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
- What the warranty does not cover (servicing available for a fee):
- Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.
- Warranty expiration.
- Factory applied serial number has been altered or removed from the product.
- Damage, deterioration or malfunction caused by:
- Normal wear and tear.
- Use of supplies or parts not meeting our specifications.
- No certificate or invoice as the proof of warranty.
- The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
- Damage caused by force majeure.
- Servicing not authorized by distributor.
- Any other causes which does not relate to a product defect.
- Delivery, installation or labor charges for installation or setup of the product.
Asking for Assistance
Technical Support
Technical Support Hours:
- 8:30 AM to 5:00 PM Monday thru Thursday
- 8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99
Website: www.purelink.de
Email: info@purelink.de
Legal & Compliance
Product identification
Model: PT-E-HD15 – manual version 1.0
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
EU conformity
PureLink hereby declares that this product PureTools PT-E-HD15 complies with Directives 1907/2006/EU und 2011/65/EU. PureLink GmbH hereby declares that this product PureTools PT-E-HD15 complies with Directives 2014/30/EU and 2014/35/EU.
| Directive / Regulation |
|---|
| 1907/2006/EU |
| 2011/65/EU |
| 2014/30/EU |
| 2014/35/EU |
The full text of the EU Declaration of Conformity is available at: www.purelink.de
FCC
Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
Disposal of electrical and electronic equipment
WEEE reg. no.: DE 93847290
The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.
