Safety precautions
- Unpack the equipment carefully and save the original box and packing material for possible future shipment
- Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
- Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
- Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
- Refer all servicing to qualified service personnel.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
- Do not put any heavy items on the extension cable in case of extrusion.
- Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
- Install the device in a place with fine ventilation to avoid damage caused by overheating.
- Keep the module away from liquids.
- Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
- Do not twist or pull by force ends of the optical cable. It can cause malfunction.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
- Unplug the power cord when left unused for a long period of time.
- Information on disposal for scrap devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.
Product Introduction
The PT-E-HD20 is a compact 4K HDMI 2.0 extender kit. It supports 4K at 60 Hz (4:4:4), HDMI data rates of up to 18 Gbps, and is compliant with HDCP 2.2. The unit enables HDMI transmission over a single CAT6 cable up to 60 metres, supporting both 4K at 60 Hz (4:4:4) and 1080p signals. It also features automatic video downscaling, allowing a 4K input signal to be converted to 1080p for compatibility with legacy displays.
Feature
- Supports HDMI 2.0, up to 4K@60Hz 4:4:4, HDR 10, 18G, HDCP 2.2.
- Extends signal up to 4K@60m over single CAT6 cable.
- Supports two-way PoC.
- Supports video resolution down-scaling from 4K to 1080p.
- Compact design, easy to install and mount.
Package List
- 1 x PT-E-HD20-TX
- 1 x PT-E-HD20-RX
- 8 x Mounting ears
- 8 x Rubber feet
- 1 x USB-C Power Adapter (5V, 1A, With locking screw)
- 1 x Manual
Note: Please contact your distributor immediately if any damage or defect in the components are found
Panel Description
| No. | Name | Description |
|---|---|---|
| 1 | USB-C Power | 1x USB-C power input, connect to 5V1A USB-C power adapter, with locking screw hole. |
| 2 | RJ45 Output | RJ45 port to connect the Cat.X output port of Transmitter by Cat.X cable. The green LED illuminates when power is applied. The orange LED illuminates when there is a valid HDMI signal input. |
| 3 | HDMI Input | Type-A female HDMI port to connect HDMI source device. |

| No. | Name | Description |
|---|---|---|
| 1 | USB-C Power | 1x USB-C power input, connect to 5V1A USB-C power adapter, with locking screw hole. |
| 2 | RJ45 Input | RJ45 port to connect the Cat.X Input port of receiver by Cat.X cable. The green LED illuminates when power is applied. The orange LED illuminates when there is a valid HDMI signal input. |
| 3 | HDMI Output | Type-A female HDMI port to connect HDMI display. |

Specification
| PT-E-HD20-TX | |
|---|---|
| Input | 1x HDMI 2.0 |
| Input Connector | 1x 19-pin type-A female HDMI |
| Output | 1x Cat.X OUT |
| Output Connector | 1x RJ45 |
| PT-E-HD20-RX | |
| Input | 1x Cat.X IN |
| Input Connector | 1x RJ45 |
| Output | 1x HDMI 2.0 |
| Output Connector | 1x 19-pin type-A female HDMI |
| General | |
| Video Resolution | Up to 4K@60Hz 4:4:4, HDR 10 |
| HDMI Audio Format | Supports LPCM 2ch, LPCM 5.1ch, LPCM 7.1ch, Dolby Digital 2ch, Dolby Digital 5.1ch, DTS 2ch, DTS 5.1ch, DTS 96/24 5.1ch. |
| Transmission Distance | 4K/1080p ≤ 60 meters |
| N.B. that the Cat.X cable length should not be less than 15 meters for best video output! | |
| HDMI Version | HDMI 2.0 |
| HDCP Version | HDCP 2.2 compliant. (The HDCP of output follows the HDCP version of display device.) |
| Power Supply | Input: 100VAC~240VAC, 50/60Hz; Output: DC 5V1A |
| Operation Temperature | -5~55°C |
| Storage Temperature | -25~70°C |
| Relative Humidity | 10%-90% |
| Dimensions (W*D*H) | PT-E-HD20-TX: 89mm x 63mm x 20mm PT-E-HD20-RX: 89mm x 63mm x 20mm |
After-Sales Service
If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.
- Product Limited Warranty: This product will be free from defects in materials and workmanship for three years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
- What the warranty does not cover (servicing available for a fee):
- o Warranty expiration.
- o Factory applied serial number has been altered or removed from the product.
- o Damage, deterioration or malfunction caused by:
- ▪ Normal wear and tear.
- ▪ Use of supplies or parts not meeting our specifications.
- ▪ No certificate or invoice as the proof of warranty.
- ▪ The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
- ▪ Damage caused by force majeure.
- ▪ Servicing not authorized by distributor.
- ▪ Any other causes which does not relate to a product defect.
- o Delivery, installation or labor charges for installation or setup of the product.
- Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.
Asking for Assistance
Technical Support:
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99
Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10 D - 48432 Rheine
www.purelink.de
Legal & Compliance
Product identification
Model: PT-E-HD20 – manual version 1.0
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
EU conformity
PureLink GmbH hereby declares that this product PureTools PT-E-HD20 complies with the RoHS Directive 2011/65/EU amended by 2015/863 EU, the EMC Directive 2014/30/EU, LVD Directive 2014/35/EU and Ecodesign Directire 009/125/EC.
| Directive / Regulation |
|---|
| 2011/65/EU |
| 2014/30/EU |
| 2014/35/EU |
The full text of the EU Declaration of Conformity is available at: http://www.purelink.de
Disposal of electrical and electronic equipment
WEEE reg. no.: DE 93847290
The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.

