Safety Precautions
To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.
- Unpack the equipment carefully and save the original box and packing material for possible future shipment
- Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
- Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
- Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
- Refer all servicing to qualified service personnel.
- To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
- Do not put any heavy items on the extension cable in case of extrusion.
- Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
- Install the device in a place with fine ventilation to avoid damage caused by overheat.
- Keep the module away from liquids.
- Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
- Do not twist or pull by force ends of the optical cable. It can cause malfunction.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
- Unplug the power cord when left unused for a long period of time.
- Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.
Introduction to PT-HDBT-200
The PT-HDBT-200 is an ultra-thin HDMI2.0 Extender consist of PT-HDBT-200-TX transmitter and PT-HDBT-200-RX receiver. It extends 1080p/4K HDMI signal over CAT5e/CAT6a cable up to 70m /40m (PoC), and enables IR and RS232 pass-through to control source or display device remotely. It also adopt a visually lossless video compression technology (VLC) to ensure the HD lossless transmission of HDR and 4K@60Hz/4:4:4 over CAT5e/CAT6a cable.
Feature
- Supports 4K/UHD/60Hz/4:4:4.
- Supports HDMI2.0 & HDCP2.2, and is backward compatible to the previous version.
- Maximum transmission distance is up to 40m for 4Kx2K, and 70m for 1080p.
- Supports CEC, IR and RS232 pass-through for long-distance control.
- Supports bi-directional PoC for simplified wiring.
- Supports HDR.
- Features DIP switch for choosing mode from: Control, Update A, Update B.
Package List
- 1 x PT-HDBT-200-TX Transmitter
- 1 x PT-HDBT-200-RX Receiver
- 4 x Mounting Ears & 4 x Screws
- 8 x Plastic Cushions
- 2 x 3-pin Phoenix Connector
- 1 x Power Adaptor (12VDC, 2A)
- 1 x User Manual
Panel Description
Transmitter
CTRL UPDATE B UPDATE A
Tx Rx DC 12V IR OUT IR IN HDBT OUT HDMI IN
1 2 3 4 5 6 7 8
Receiver
| No. | Name | Description |
|---|---|---|
| ① | MODE Switcher | CTRL: RS232 pass-through control mode. UPDATE A: Update Valens IC program, connect a PC to the RS232 port, and then double-click the update file (.bat). UPDATE B: Update compression IC program, the upgrade method is the same as the above UPDATE A. |
| ② | Power LED | RED: DC power present. |
| ③ | HDMI IN (Transmitter) HDMI OUT (Receiver) | Connect with HDMI source. Connect with HDMI display. |
| ④ | 3-pin Terminal Block | If one is connected with control device (e.g. PC), and the other should be connected with the third-party that need to be controlled. |
| ⑤ | IR IN | Work with far-end IR OUT port, connect with IR Receiver (with carrier) to collect IR signal to control far-end display device from local. |
| ⑥ | IR OUT | Work with far-end IR IN port, connect with IR Emitter to send IR signal to control input source device from remote. |
| ⑦ | HDBT OUT (Transmitter) HDBT IN (Receiver) | Connect to the HDBT IN socket on Receiver via CAT5e/6a cable. Connect to the HDBT OUT socket on Transmitter CAT5e/6a cable. |
| ⑧ | DC 12V Power Port | Support bi-directional PoC, either ports should be connected with 12V DC 2A power adaptor. |
CTRL UPDATE B UPDATE A
DC 12V Tx Rx HDMI OUT HDBT IN IR OUT IR IN
1 2 3 4 5 6 7 8
Specification
| PT-HDBT-200-TX Transmitter | |
|---|---|
| Input | HDMI IN |
| Output | HDBT OUT |
| Control Ports | IR IN, IR OUT, RS232 |
| PT-HDBT-200-RX Receiver | |
| Input | HDBT IN |
| Output | HDMI OUT |
| Control Ports | IR IN, IR OUT, RS232 |
| General | |
| Transmission Mode & Distance | HDBaseT; 1080p ≤ 70m; 4K×2K ≤ 40m |
| Resolution | Up to 4K×2K@60Hz 4:4:4 |
| Bandwidth | 18Gbps |
| HDMI Standard | HDMI2.0 & HDCP2.2 |
| Power Consumption | 14W (max) |
| Operation Temperature | 0 ~ +40℃ |
| Storage Temperature | -10 ~ +50℃ |
| Relative Humidity | 0% ~ 90% |
| External Power Supply | Input: 100VAC~240VAC, 50/60Hz; Output: 12VDC 2A |
| Dimension (W*H*D) | 115mm x 16 mm x 84mm |
| Net Weight (g) | Transmitter: 150g; Receiver: 153g |
System Diagram
IR Emitter
4K Blu-Ray Laptop
TV Remote
IR Receiver
Transmitter Receiver
IR Emitter
HDTV
Blu-Ray
Remote
IR Receiver
HDMI:
IR:
RS232:
CATx:
Power:
4K 40m,1080P 70m
PoC
After-Sales Service
If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.
- Product Limited Warranty: This product will be free from defects in materials and workmanship for two years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
- What the warranty does not cover (servicing available for a fee): Warranty expiration. Factory applied serial number has been altered or removed from the product. Damage, deterioration or malfunction caused by: Normal wear and tear. Use of supplies or parts not meeting our specifications. No certificate or invoice as the proof of warranty. The product model showed on the warranty card does not match with the model of the product for repairing or had been altered. Damage caused by force majeure. Servicing not authorized by distributor. Any other causes which does not relate to a product defect. Delivery, installation or labor charges for installation or setup of the product.
- Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.
Asking for Assistance
Technical Support
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99
Technical Support Hours
- 8:30 AM to 5:00 PM Monday thru Thursday
- 8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de
Legal & Compliance
Product identification
Model: PT-HDBT-200 – manual version 1.0
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
FCC
Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.
Disposal of electrical and electronic equipment
WEEE reg. no.: DE 93847290
The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.