← Products
4K HDMI HDBaseT Receiver with PoH
Active

PT-HDBT-702-RX

4K HDMI HDBaseT Receiver with PoH

The PT-HDBT-702-RX is an HDBaseT 4K receiver designed for receiving HDMI signals over standard Cat.5e or Cat.6a cabling, supporting distances up to 40 metres for 4K and 70 metres for 1080p resolutions. It supports HDMI …

ManualFAQSpecificationsDatasheetCE declaration ↗
Chapter 1 of 10

Safety precautions

  • Unpack the equipment carefully and save the original box and packing material for possible future shipment
  • Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
  • Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
  • Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
  • Refer all servicing to qualified service personnel.
  • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
  • Do not put any heavy items on the extension cable in case of extrusion.
  • Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
  • Install the device in a place with fine ventilation to avoid damage caused by overheat.
  • Keep the module away from liquids.
  • Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
  • Do not twist or pull by force ends of the optical cable. It can cause malfunction.
  • Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
  • Unplug the power cord when left unused for a long period of time.
  • Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.
Chapter 2 of 10

Introduction to PT-HDBT-702-RX

The PT-HDBT-702-RX is a mini-size HDBaseT Receiver to receive HDMI signal from HDBaseT Transmitter or Matrix Switcher via CAT5e/CAT6a cable. HDBaseT technology is used to transmit high-resolution 1080p/ 4k signal from transmitter to the PT-HDBT-702-RX via a CAT5e/CAT6a cable at a distance of up to 70/40m. Moreover, it support CEC, bi-directional RS232&IR control, and bi-directional PoH function.

Chapter 3 of 10

Feature

  • Support Full HD: Delivers high resolution image (1080p@60Hz@48 b/pixels/3D/4Kx2K).
  • Maximum transmission distance is 70m for 1080p and 40m for 4Kx2K over single CAT5e/CAT6a cable
  • High Bandwidth: 10.2Gps.
  • HDTV Compatible, use HDMI 1.4 and HDCP2.2 compliant.
  • Support CEC/IR/RS232 passthrough.
  • Support bi-directional PoH function.
  • Bi-directional RS232/IR control.
  • Use HDBaseT technology.
  • LED indicators show work status.
Chapter 4 of 10

Package Content

  • 1 x PT-HDBT-702-RX
  • 4 x Plastic Cushions
  • 1 x User Manual
  • 2 x Mounting Ears with 4 Screws
  • 1 x IR Receiver
Chapter 5 of 10

Panel Description

No.NameDescription
①LINKHDBT Link status indicator: OFF: No Link GREEN: Link Successful Blinking GREEN: Link abnormal
②HDCPHDCP compliant indicator OFF: No HDMI traffic (no picture) GREEN: Traffic with HDCP. Blinking GREEN: Traffic without HDCP
③PowerOFF: No power; RED: DC power present.
④RS232RS232 connector.
⑤IR INConnect with 5V IR receiver (with carrier) to collect infrared signal, work with far-end IR OUT port
⑥IR OUTConnect with 5V IR emitter to send infrared signal, work with far-end IR IN port
⑦HDMI OUTConnect with HDMI display
⑧HDBT INConnect to the HDBT OUT socket on the transmitter via CAT5e/CAT6a cable.
⑨DC 24VConnect with power supply (Not necessary if transmitter connects with power adaptor).

Note: Pictures shown in this manual are only for reference.

Chapter 6 of 10

Specification

Input & Output
InputIR, HDBT& RS232
Input Connector3.5mm mini jack, RJ-45, 3p captive screw connector
OutputHDMI, IR, RS232
Output ConnectorHDMI female, 3.5mm mini jack, 3p captive screw connector
General
Resolution Range640x480@60Hz~4K×2K@30Hz
Transmission ModeHDBaseT
Transmission Distance1080p ≤ 70m; 4Kx2K ≤ 40m
Bandwidth10.2Gbps
HDMI StandardSupport HDMI1.4 and HDCP2.2
Temperature0~ 50℃
Humidity10% ~ 90%
Power SupplyInput: 100VAC~240VAC, 50/60Hz; Output: DC 24V, 1.25A
Power Consumption14W
Dimension (W*H*D)115mmx16.2mm x109mm
Net Weight196g
Chapter 7 of 10

System Diagram

Chapter 8 of 10

After-Sales Service

If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.

  1. Product Limited Warranty: This product will be free from defects in materials and workmanship for two years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
  2. What the warranty does not cover (servicing available for a fee):
  3. Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.
  • Warranty expiration.
  • Factory applied serial number has been altered or removed from the product.
  • Damage, deterioration or malfunction caused by:
  • Normal wear and tear.
  • Use of supplies or parts not meeting our specifications.
  • No certificate or invoice as the proof of warranty.
  • The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
  • Damage caused by force majeure.
  • Servicing not authorized by distributor.
  • Any other causes which does not relate to a product defect.
  • Delivery, installation or labor charges for installation or setup of the product.
Chapter 9 of 10

Asking for Assistance

Technical Support

Phone+49 5971 800299 - 0
Fax+49 5971 800299 – 99
Technical Support Hours8:30 AM to 5:00 PM Monday thru Thursday 8:30 AM to 4:00 PM Friday
Write toPureLink GmbH Von-Liebig-Straße 10 D - 48432 Rheine
Websitewww.purelink.de
Emailinfo@purelink.de
Was this helpful?
← PreviousNext chapter →
Staff sign-in