Safety Precautions

To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.

• Unpack the equipment carefully and save the original box and packing material for possible future shipment
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of extrusion.
• Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with fine ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Product Introduction

Thanks for choosing the PT-PMS-82S 8x2 multi-format seamless presentation matrix switcher with one PT-HDBT-200 extender kit! The matrix switcher simplifies meeting room and presentation space system integration by providing one HDBaseT input, four HDMI inputs, one VGA input, one DP input, one USB-C input, one HDBaseT output and one HDMI output. It also provides external audio inputs to be embedded in HDBaseT, HDMI and VGA video inputs respectively. Moreover, it provides MIX audio input for global audio.
The matrix switcher provides true 4K scaling up to 4K@60Hz@4:4:4. Both inputs and outputs are capable of providing 4K@60Hz@4:4:4 signals. The HDBaseT input and output provide an innovative solution with VLC technology, allowing transmission of HDMI 2.0 signals over a CATx cable while ensuring very high, original image quality. It is designed for use with the PT-HDBT-200 extender kit. The USB-C input is ideal for AV interfacing with newer MacBook, Chromebook, and Windows PC, as well as smart phones and tablets.
The matrix switcher supports auto switching on HDMI, HDBaseT and HDMI loop outputs based on TMDS activity signals sensing. It also allows users to control system functionality via Web GUI, RS232, IR and CEC. Additionally, users can control relay device such as the rise and fall of projector screen over RELAY ports.
The matrix switcher is designed to be the central component of AV system. It is ideal for applications where multiple signals with different resolutions must be optimized for displays. It is also suitable for presentation spaces where two displays are needed.

Features

• HDMI 2.0 and HDCP 2.2 compliant. The video resolution can up to 4K@60Hz 4:4:4.
• Supports video resolution down-scaling and up-scaling, 1080P, 1920x1200P, 4K@30Hz, 4K@60Hz can be selected for HDMI and HDBaseT outputs.
• Supports automatic switching.
• Features a mirrored HDMI output for HDBaseT output.
• Visually lossless video de-compression and compression for HDMI signals transmission up to 40m at 4K and 70m at 1080P on HDBaseT input and output.
• HDBaseT input and output support 24V PoC.
• External balanced audio inputs can be embedded in one HDBaseT input and two HDMI video inputs respectively.
• Provides two groups of audio outputs (balanced audio and digital SPDIF audio) for audio de-embedding.
• Supports MIX audio input and its volume control.
• Supports HDMI output, HDBaseT output audio control.
• Controllable via RS232 local and pass-through, IR local and pass-through, TCP/IP, relay, CEC and on OSD.

Package List

Matrix Switcher

• 1x PT-PMS-82S 8x2 HDMI 2.0 Seamless Matrix Switcher
• 2x Mounting Ears with 6 Screws
• 4x Plastic Cushions
• 1x IR Remote
• 1x IR Receiver
• 3x 3-pin Terminal Blocks
• 7x 5-pin Terminal Blocks
• 1x Power Adaptor (24V DC 6A)

Extender Kit

• 1x PT-HDBT-200-TX HDBaseT Transmitter
• 1x PT-HDBT-200-RX HDBaseT Receiver
• 4x Mounting Ears with 8 Screws
• 8x Plastic Cushions
• 1x 3-pin Terminal Block
• 1x User Manual

Note: Please contact your distributor immediately if any damage or defect in the components is found.

Specification

PT-PMS-82S Matrix Switcher

Video Input

Video Output

Audio Input

Audio Output

Control Part

General

PT-HDBT-200 Extender Kit

Transmitter (TX)

Receiver (RX)

General

Panel Description

Matrix Switcher Front Panel

• Power LED : The LED illuminates red when the device is in standby, or illuminates green when the device is powered on.
• SOURCE : Total nine buttons with blue backlight. 1-HDBT input selector / Left Key for On Screen Display control (OSD). 2-HDMI input selector / Right Key for OSD. 3-HDMI input selector / Up Key for OSD. 4-HDMI input selector / Down Key for OSD. 5-HDMI input selector. 6-VGA input selector. 7-DP input selector. 8-USB-C input selector / Enter key for OSD. Auto switching mode selector. Press this to enter or exit automatic switching mode. / Press and hold it at least 2 seconds to enable OSD menu.
• OUTPUTS : Two buttons with blue backlight. 1-HDMI output selector. 2-HDBT output selector.
• RESOLUTION : Two output video resolution selectors. Press the 1.HDMI or 2.HDBT button repeatedly to cycle through the four video resolutions. A series of four LEDs, one of which illuminates blue to indicate which resolution is selected.

VOLUME

• Press the volume knob in to toggle among MIX, HDMI OUT and HDBT OUT audio control, and the corresponding LED will illuminate blue.
• Rotate the knob to increase or decrease the volume of the selected audio.
• Press and hold the knob at least three seconds to mute the selected audio. Rotate the knob to unmute.

Matrix Switcher Rear Panel

• INPUT : Total eight video inputs, five audio inputs and one IR input. 1-HDBT: RJ45 port to connect the PT-HDBT-200-TX transmitter to receive AV signal, IR and RS232 control signal, and one external balanced audio input (5-pin) can be embedded in the HDBT video. In addition, the HDBT input supports 24V PoC. 2-HDMI: Type-A female HDMI port to connect the HDMI source. One external balanced audio input (5-pin) can be embedded in the HDMI video. 3-HDMI: Type-A female HDMI port to connect the HDMI source. One external balanced audio input (5-pin) can be embedded in the HDMI video. 4-HDMI: Type-A female HDMI port to connect the HDMI source. 5-HDMI: Type-A female HDMI port to connect the HDMI source. 6-VGA: 15-pin female VGA port to connect the VGA source. One stereo auxiliary audio input (3.5mm jack) can be embedded in the VGA video. 7-DP: Type-A female DP port to connect the DP source. 8-USB-C: Type-C USB port to connect the device with SlimPort output, e.g. Macbook. IR IN: 3.5mm jack to connect the IR receiver for IR pass-through. MIX: 5-pin terminal block to connect the audio source for global audio mixing.
• OUTPUT : 1-HDMI: Type-A female HDMI port to connect the video display. 2-HDMI: Type-A female HDMI port to connect the video display. 2-HDBT: RJ45 port to connect the PT-HDBT-200-RX receiver to transmit AV signal, IR and RS232 control signal. The HDBT output supports 24V PoC. Note: The 2-HDMI and 2-HDBT ports output the same signal. IR IN: 3.5mm jack to connect the IR receiver for IR pass-through. IR OUT: 3.5mm jack to connect the IR emitter for IR pass-through.
• AUDIO OUTPUT : 1: One balanced audio output (5-pin) and one digital SPDIF audio output for 1-HDMI output audio de-embedding. 2: One balanced audio output (5-pin) and one digital SPDIF audio output for 2-HDBT output audio de-embedding.
• CONTROL : RS232: 3-pin terminal block to connect the control device (e.g. PC) to control the switcher by sending RS232 commands. It also supports RS232 pass-through control. RELAY 1-2: Two 3-pin terminal blocks to connect the relay devices (e.g. projector screen). IR EYE: 3.5mm jack to connect IR receiver to control the switcher by the IR remote. TCP/IP: RJ45 port to connect the control device (e.g. PC) to control the switcher by GUI. FIRMWARE: Type-A USB port for firmware upgrade.
• DC 24V : DC barrel connector for the power adapter connection.

Transmitter Front and Rear Panel

• MODE SWITCH: Put the Mode switch in the CTRL position for normal operation and to allow RS232 control pass-through. Put the switch in the UPDATE A position to update the Valens IC program. Finally, put the switch in the UPDATE B position to update the compression IC program.
• POWER LED: The LED illuminates red when power is applied.
• HDMI IN: Type-A female HDMI port to connect the HDMI source.
• RS232: 3-pin terminal block to connect the RS232 control device (e.g. PC) or a device to be controlled by RS232 commands.
• IR IN: 3.5mm jack to connect the IR receiver for IR pass-through.
• IR OUT: 3.5mm jack to connect the IR emitter for IR pass-through.
• HDBT OUT: RJ45 port to connect the HDBT IN port of switcher by CATx Ethernet cable.
• DC 12V: DC barrel connector for the power adapter connection.

Receiver Front and Rear Panel

• MODE SWITCH: Put the Mode switch in the CTRL position for normal operation and to allow RS232 control pass-through. Put the switch in the UPDATE A position to update the Valens IC program. Finally, put the switch in the UPDATE B position to update the compression IC program.
• POWER LED: The LED illuminates red when power is applied.
• HDMI OUT: Type-A female HDMI port to connect the display device.
• RS232: 3-pin terminal block to connect the RS232 control device (e.g. PC) or a device to be controlled by RS232 commands.
• IR IN: 3.5mm jack to connect the IR receiver for IR pass-through.
• IR OUT: 3.5mm jack to connect the IR emitter for IR pass-through.
• HDBT IN: RJ45 port to connect the HDBT OUT port of switcher by CATx Ethernet cable.
• DC 12V: DC barrel connector for the power adapter connection.

System Connection

Usage Precaution

• Make sure all components and accessories included before installation.
• System should be installed in a clean environment with proper temperature and humidity.
• All of the power switches, plugs, sockets, and power cords should be insulated and safe.

• All devices should be connected before power on.

System Diagram

6. VGA 8. USB-CAUDIO 7. DP DC 24V
OUTPUTS
2. HDBT IR IN1. HDMI
TCP/IP
CONTROL
IR EYE FIRMWARE
1
L R L R
IR OUT2. HDMI5. HDMI4. HDMI2. HDMI 3. HDMI1. HDBTIR IN
L R L RL R
MIX
L R
INPUTS
2 RS232
Tx Rx
RELAY1
NO COM NC
RELAY2
NO COM NC
AUDIO OUT
Blu-Ray DVD
HDMI 2.0 Transmitter
Game Console
PC
MacBooK
Cellphone
RS232
Tx Rx
IRSTEREO BRIDGE
MONO
L R
MIC
LINE48V
MIC 1 2
INPUTS
Audio Player
Speaker Amplifier Soundbar
HDTV Project ScreenProjector HDTV HDMI 2.0 Receiver
5. HDMI4. HDMI 6. VGA
OK
2. HDBT BLACK
Wireless Router iPad
IR
Receiver
Remote
Central
Control System
4K 40m,1080P 70m
4K 40m,1080P 70m
DP:
VGA:
HDMI:
Control:
Ethernet:
Audio:
HDBaseT:
USB-C:

Button Control

Manual Switching

When the switcher is in manual switching mode, the AUTO button LED goes out. Please following the below steps to switch input source to output channel.

1. Press any one of eight input buttons to select input source, and the corresponding button LED turns blue.
2. Press either 1-HDMI or 2-HDBT output button to select output channel, and the corresponding button LED turns blue.
3. Press the input button again to confirm switching setting, otherwise, it will automatically confirm after three seconds.

Automatic Switching

Please following the below steps to enable auto switching mode for 1-HDMI or 2-HDBT output.

1. Press AUTO, and the button LED turns blue.
2. Press either 1-HDMI or 2-HDBT output button, and the corresponding button LED turns blue.
3. Press AUTO button again to confirm the setting, otherwise, it will automatically confirm after three seconds.
4. Repeat the above three steps can exit auto mode, but the input source will remain the current setting.

Note: The AUTO button LED illuminates blue when the 1-HDMI output is in auto mode or the 2-HDBT output in auto mode.

When in auto mode, the switcher will switch according to the following rules:

• The switcher will switch to the first available active input starting at input 1 to 8.
• New input: The switcher will automatically select the new input once detecting a new input.
• Reboot: If power is restored to the switcher, it will automatically reconnect the input before powered off.
• Source removed: When an active source is removed, the switcher will switch to the first available active input starting at 1-HDBT input.
• In auto mode, the input source also can be switched by the manual switching steps.

Resolution Selection

Press the 1.HDMI or 2.HDBT button on RESOLUTION area repeatedly to cycle through the four video resolutions. A series of four LEDs, one of which illuminates blue to indicate which resolution is selected.

Sound Volume Control

Press volume knob to choose MIX, HDMI OUT or HDBT OUT audio needs to be adjusted, the corresponding LED will turn blue and keep on.

• Adjusting the knob in clockwise direction to increase sound volume.
• Adjusting the knob in anti-clockwise direction to decrease sound volume.
• Press and hold the knob at least three seconds to mute the selected audio. Rotate the knob to unmute.

IR Remote Control

Connect IR receiver to the IR EYE port, the switcher can be controlled by the following IR remote.

1. Select input source
2. Select output channel
3. Press AUTO to enable automatic switching mode, and then select output channel.
4. Press BALCK, and then select output channel to make it output black screen.
5. Enable/Disable OSD menu.
6. Confirm and Navigation buttons: OK, UP, DWON, LEFT and RIGHT for OSD menu.
7. Return to the previous OSD menu.
8. MIX input audio control: Mute, Volume Down and Volume Up.
9. HDMI output audio control: Mute, Volume Down and Volume Up.
10. HDBT output audio control: Mute, Volume Down and Volume Up.

5. HDMI4. HDMI 6. VGA
OK
2. HDBT BLACK

GUI Control

The switcher also be controlled via TCP/IP. The default IP settings are:

Type 192.168.0.178 in the internet browser, it will enter the below log-in webpage:
Username: admin
Password: admin
Type the user name and password, and then click Login to enter the section for video switching.

Video Switching

• HDMI OUTPUT: Switch the selected input source to HDMI output. Click AUTO to enable/disable automatic switching mode.
• HDBT OUTPUT: Switch the selected input source to HDBT output. Click AUTO to enable/disable automatic switching mode.
• Preset: Save the current routing status to preset 1~5.

Resolution Selection

• HDMI OUTPUT: Select the HDMI output video resolution. Press AUTO to automatically select the best output resolution for satisfying the connected display.
• HDBT OUTPUT: Select the HDBT output video resolution. Press AUTO to automatically select the best output resolution for satisfying the connected display.

Note: If EDID communication is failed, the 1080P@60Hz will be used as default output resolution.

Audio Control

• 1.HDBT Embedded: Select the external balanced audio (5-pin) to embed in 1.HDBT video input.
• 2.HDMI Embedded: Select the external balanced audio (5-pin) to embed in 2.HDMI video input.
• 3.HDMI Embedded: Select the external balanced audio (5-pin) to embed in 3.HDMI video input.
• MIX: MIX input audio volume control.
• HDMI Output: Select MIX input audio to mix with HDMI output audio, and then control the global output audio by volume bar and buttons.
• HDBT Output: Select MIX input audio to mix with HDBT output audio, and then control the global output audio by volume bar and buttons.

Configuration

PoC Setting

• Turn on or off PoC for HDBT output port.
• Turn on or off PoC for HDBT input port.

EDID Management

• Select the compatible built-in EDID for the selected input source.
• Upload user-define EDID.

Relay Control

• Set Momentary or Latching relay control mode for Relay 1 and Relay 2.
• After setting the auto stop time, click Momentary, the projector screen starts to be rolled up or dropped down until the auto stop time is up.
• Click Latching, the projector screen starts to be rolled up or dropped down, and then click Latching again to stop process.

RELAY 1 and RELAY 2 Ports Definition:

• When click Momentary, the NO connection closes, and the NC connection opens. When the delay time is up, the NO connection opens, and the NC connection closes.
• When click Latching, the NO connection closes, and the NC connection opens. When the delay time is up, the NO connection opens, and the NC connection closes.

CEC Control

If the input sources and display support CEC, they can be controlled by the below control buttons to replace IR remote.

Source Control

• Select the input source which needs to be control, and then press function button as need.

Display Control

• Select the output display which needs to be control, and then press function button as need.

User-define

The switcher also provides user-define CEC functions, the CEC command can be edited and saved in the Trigger textbox.

• Select the input source, and then type CEC command in the Trigger 1 or Trigger 2 box to control the selected source.
• Select the output display, and then type CEC command in the Trigger 1 or Trigger 2 box to control the selected display.

Tags Setting

• INPUTS: Modify the label of input sources.
• Preset: Modify the label of presets.

RS232 Control

Port Mode

• HDBT Transmitter Pass Through: Establish RS232 pass-through communication between the switcher and the HDBaseT transmitter (e.g. PT-HDBT-200-TX). The RS232 port of the switcher can be used to transfer commands to control the third-party device which is connected to the HDBaseT transmitter.
• HDBT Receiver Pass Through: Establish RS232 pass-through communication between the switcher and HDBaseT receiver (e.g. PT-HDBT-200-RX). The RS232 port of the switcher can be used to transfer commands to control the third-party device which is connected to the HDBaseT receiver.
• Local Control: The RS232 port of the switcher is used to connect control device (e.g. PC) to control the switcher.

Command

• Select Local, HDBT In or HDBT Out control mode.
• Local: Send RS232 commands to control the local third-party which is connected to the RS232 port of the switcher.
• HDBT In: Send RS232 commands to control the far-end third-party which is connected to the RS232 port of HDBaseT transmitter.
• HDBT Out: Send RS232 commands to control the far-end third-party (e.g. projector) which is connected to the RS232 port of HDBaseT receiver.
• Select HEX or ASCII format.
• Baud Rate: Supports 2400, 4800, 9600, 19200, 38400, 57600 or 115200.
• Command Ending: NULL, CR, LF or CR+LF can be chosen.
• Command: Type command in this textbox to control the third-party device.
• Trigger On: Type Power On command in this box to turn on the third-party device.
• Trigger Off: Type Power Off command in this box to turn off the third-party device.

Network Setting

• Static IP or Dynamic Host Configuration Protocol (DHCP).
• Modify the static IP Address, Subnet Mask, and Gateway.

Password Setting

• Modify the login password.
• Lock or unlock the front panel buttons.

GUI Upgrade

Please visit at http://192.168.0.178:100 for GUI online upgrade.
Type the username and password (the same as the GUI log-in setting, modified password will be available only after rebooting) to login the configuration interface.
After that, click Administration in the source menu to get to Upload Firmware as shown below:

Select the desired update file and press Apply, it will start upgrading then.

RS232 Control

RS232 Control Software

• Installation: Copy the control software file to the control PC.
• Uninstallation: Delete all the control software files in corresponding file path.

Basic Settings: Connect the switcher with all input devices and output devices needed, then to connect it with a PC which is installed with RS232 control software. Double-click the software icon to run this software. Here take the software CommWatch.exe as example:

Please set the parameters of COM number, bound rate, data bit, stop bit and the parity bit correctly, and then you are able to send command in command sending area.
Parameter configuration area
Monitoring area, show the commands and its feedback information.
Command sending area

RS232 Communication Command

Communication protocol: RS232 Communication Protocol
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none

Note: All commands not need to end with “<CR><LF>”.In the commands, “[” and “]” are symbols for easy reading and do not need to be typed in actual operation.Please remember to end the commands with the ending symbols “.” or “;”.Type the command carefully, it is case-sensitive.

Device Control

Source Switching

Preset Setting

Output Resolution Setting

Audio Control

EDID Management

Relay Control

VGA Output Image Adjustment

When 6-VGA source is selected, the below commands can be used to adjust the output picture.

Switcher Baud Rate Setting

CEC Control

If the input sources and displays support CEC, they can be controlled by sending CEC commands to replace IR remote.

1. According to the below command to enable CEC control.

Step 2: According to the below command format to send specific command to control input source or display device.
CEC[I/O][port][command].The “[I]” represents the input port. The “[O]” represents the output port.The “[port]” represents the port number. The input ports are 01~05, and the output ports are 06~07.The “[command]” represents the specific command from the table below.

✔ Control the input source:

✔ Control the output display:

Third-party Device Control

The switcher supports RS232 pass-through control, the third-party device can be controlled by RS232 command, and the command format as shown below:

OSD Control

The PT-PMS-82S provides a powerful OSD operation menu, contains 3 parts: optional settings, image settings, and system setting etc.
There are two ways to enter OSD menu:
1) Press and hold the MENU/2s button at least two seconds on the front panel.
2) Press the MENU button on the IR remote.

Operation:
• Press direction buttons on IR Remote to switch between menu options and menu pages.
• Press OK on the IR Remote to confirm the selection.
Options include Picture, Sound, Option, System, and Info.

PICTURE MENU

Note: When set the Picture Mode to User, the Picture Adjust and Colortemp Adjust are available.

SOUND MENU

OPTION MENU

PT-PMS-82S

Note: When set the Picture Mode to User, the Picture Adjust and Colortemp Adjust are available.

SOUND MENU

OPTION MENU

SYSTEM MENU

INFO MENU

Panel Drawing

PT-PMS-82S Matrix Switcher
PT-HDBT-200-TX HDBaseT Transmitter
6. VGA 8. USB-CAUDIO 7. DP DC 24V
OUTPUTS
2. HDBT IR IN1. HDMI
TCP/IP
CONTROL
IR EYE FIRMWARE
1
L R L R
IR OUT2. HDMI5. HDMI4. HDMI2. HDMI 3. HDMI1. HDBTIR IN
L R L RL R
MIX
L R
INPUTS
2 RS232
Tx Rx
RELAY1
NO COM NC
RELAY2
NO COM NC
AUDIO OUT
8. USB-C1. HDBT 7. DP5. HDMI 6. VGA4. HDMI3. HDMI2. HDMI
SOURCE
SELECT
MUTE/3s
MIX
HDBT OUT
HDMI OUT
VOLUME
1. HDMI
OUTPUTS
1920x1200
4K@30Hz
4K@60Hz
1080P
RESOLUTION
1920x1200
4K@30Hz
4K@60Hz
1080P
ENTER MENU/2s
PT-PMS-82S
Presentation Matrix
436.4 mm
31.8 mm
44.0 mm
115.0 mm
84.0 mm
16.0 mm

PT-PMS-82S

PT-HDBT-200-RX HDBaseT Receiver
PT-HDBT-200-RX HDBaseT Receiver

Troubleshooting and Maintenance

Note: If your problem persists after following the above troubleshooting steps, seek further help from authorized dealer or our technical support.

After-Sales Service

If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.

1. Product Limited Warranty: The product will be free from defects in materials and workmanship for two years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
2. What the warranty does not cover (servicing available for a fee): &#8226; Warranty expiration. &#8226; Factory applied serial number has been altered or removed from the product. &#8226; Damage, deterioration or malfunction caused by: &#8226; Normal wear and tear. &#8226; Use of supplies or parts not meeting our specifications. &#8226; No certificate or invoice as the proof of warranty. &#8226; The product model showed on the warranty card does not match with the model of the product for repairing or had been altered. &#8226; Damage caused by force majeure. &#8226; Servicing not authorized by distributor. &#8226; Any other causes which does not relate to a product defect. &#8226; Delivery, installation or labor charges for installation or setup of the product.
3. Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.

Asking for Assistance

Technical Support:
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99
Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday
Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de

Legal & Compliance

Product identification

Model: PT-PMS-82S – manual version 1.0

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

FCC

Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.

Disposal of electrical and electronic equipment

WEEE reg. no.: DE 93847290

The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.

Batteries

Batteries must not be disposed of with household waste. Return used batteries free of charge to collection points or retailers.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.