Product Introduction

The PT-PSW-31I is an HDMI 2.0 3x1 Multi-format Presentation Switcher converting AV signal from HDMI, Mini DP and USB-C inputs to HDMI output. The PT-PSW-31I is a green low energy consumption product which has a various application in different places, such as classroom, small meeting room, lecture hall, and etc.

Features

• Supports HDMI, Mini DP and USB-C input signals to be converted to HDMI signals.
• Auto-detects the input signal, the last connected signal source will be switched to the output automatically.
• Starts to scan from HDMI to USB-C and switch the first detected source to output.
• Supports Mini DP and USB-C input video resolution up to 4K@30Hz 4:4:4.
• Supports HDMI input and output video resolutions up to 4K@60Hz 4:4:4 HDR and Dolby Vision.
• HDCP 2.2 compliant.
• Powered via USB-A from display end.
• LED for power indicating.

Packing List

• 1x PT-PSW-31I
• 1x User Manual

Note: Please contact your distributor immediately if any damage or defect in the components is found.

Panel Description

1. Type-A HDMI input port to connect the device with HDMI output.
2. Mini DP input port to connect Mac MINI or other devices with Mini DP output.
3. Type-C USB input port to connect MacBook, Chromebook or other devices with SlimPort output.
4. The power LED illuminates blue when power is applied and is off when no power is present.
5. Type-A HDMI output port to connect display.
6. Type-A USB port to connect the display or other device to power the switcher.

HDMI
USB-C
To Display / Power In
3x1
Presentation Switcher
Multiformat 4K (60Hz 4:4:4),
HDMI Out
PT-PSW-31I
# 4
# 2
# 1
# 5
# 6
# 3

System Connection

The following diagram illustrates typical input and output connections that can be utilized with this switcher:

Technical Specification

After-Sales Service

If problems occur while operating the product, please use the troubleshooting and maintenance information in this manual to deal with these problems. Any transport costs are borne by the user during the warranty period.

1. Product Limited Warranty: The product will be free from defects in materials and workmanship for two years (purchase invoice date shall prevail). A proof of purchase is the evidence that the unit is within the warranty period. A bill of sale or receipted invoice must be presented to obtain warranty service.
2. What the warranty does not cover (servicing available for a fee): 5 Warranty has expired 5 The factory applied serial number has been altered or removed from the product. 5 Damage, deterioration or malfunction caused by: b Normal wear and tear. b Use of accessories, supplies or parts, not meeting our specifications. 5 No bill of delivery or invoice as proof of warranty. 5 The product model displayed on the warranty card does not match the product model for repairing or it has been altered. 5 Damage caused by force majeure. 5 Servicing, not authorized by distributor. 5 Any other cause not related to a product defect. 5 Delivery, installation or labor charges for product installation and/or product setup.
3. Technical Support: For any questions or problem troubleshooting inquiries, contact your distributor or reseller. Please provide the respective product name and version, a detailed description of the failure situation as well as how the failure occurred.

Asking for Assistance

Technical Support:
Phone: +49 5971 800299 -0
Fax: +49 5971 800299 -99

Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday

Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de

SAFETY PRECAUTIONS

To ensure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.

• Unpack the equipment carefully and save the original box and packing material for possible future shipment.
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of protrusion.
• Do not remove the housing of the device as opening or removing the housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with sufficient ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Legal & Compliance

Product identification

Model: PT-PSW-31I – manual version 1.0

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

FCC

Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.

Disposal of electrical and electronic equipment

WEEE reg. no.: DE 93847290

The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.