Safety precautions

To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.

• Unpack the equipment carefully and save the original box and packing material for possible future shipment.
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of extrusion.
• Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with fine ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Introduction to PT-SP-HD12S

The PT-SP-HD12S is a HDMI splitter featuring the capability to repeat HDMI or DVI source to 2 displays synchronously. Compliance with HDMI 1.4& HDCP1.4, the PT-SP-HD12S provides comprehensive resolution capacities up to 4K& 1080p 3D. It’s capable to automatically recognize the resolution and HDCP compliant status of the input signal. Input signal will be automatically equalized for reliable transmission with proper EDID Management.
Moreover, the PT-SP-HD12S supports convenient online update through USB port.

Features

• 2 simultaneous HDMI outputs
• Supports Hot-plugging
• Compliant with HDMI 1.4, capable to transmit 1080p 3D& 4K signal
• Transmits 1080p HDMI up to 15m
• High bandwidth: 10.2Gbps
• HDCP compliant
• Auto-identify input resolution
• Supports EDID management, automatically adopt the resolution of the first detected display from port 1~2
• Intuitive indicator for connection status& input HDCP compliance status
• Convenient firmware update port

Package List

• 1 x PT-SP-HD12S
• 2 x Mounting Ears
• 4 x Mounting Screws
• 4 x Plastic Cushions
• 1 x Power Adapter (DC 5V 1A)
• 1 x User Manual

Note: Please contact your distributor immediately if any damage or defect in the components is found.

Front Panel

Note: Output HDCP compliant status depends on input signal. When the input signal is with HDCP, then output signal is with HDCP and vice versa.

Rear Panel

Note: a) Pictures shown in this manual are for reference only, different model and specifications are subject to real product.
b) HDMI signal contains both HDMI video signal and embedded audio signal (PCM, Dolby Digital, DTS, DTS-HD), while DVI signal contains solely video signal.
c) The PT-SP-HD12S is capable to switch input signal format according to the displays.
d) For example, when the input signal is HDMI and the display can only support DVI signal, the PT-SP-HD12S will switch the signal into DVI format.
e) EDID Management: automatically manage output signal (e.g. output resolution) to fit all displays.

Usage Precautions

• Verify all components and accessories included before installation.
• System should be installed in a clean environment with proper temperature and humidity (see page8 for limits).
• All of the power switches, plugs, sockets and power cords should be insulated and safe.
• All devices should be connected before power on.

System Diagram

The following diagram illustrates typical input and output connections that can be utilized with the PT-SP-HD12S:
HDMI IN: 4K Blu-ray; HDMI OUT: HDTV, Projector/Screen

Connection Procedures

1. Connect a HDMI/ DVI source device (e.g. Blue-ray DVD) to the HDMI INPUT socket of PT-SP-HD12S with HDMI cable.
2. Connect HDMI displays to HDMI OUTPUT sockets of PT-SP-HD12S with HDMI cable.
3. Plug a DC 5V power adapter to the power port of PT-SP-HD12S.

Note: All the ports support hot-plug. It’s important to know that hot plugging a display may result in splash screen at output ends.

EDID Management

The PT-SP-HD12S comprises 1 HDMI input port & 2 HDMI output ports, EDID management helps distributing and routing signals from the source at the resolution of the first detected display (detecting from output 1~2).
For example: when output 1 connects with a 1080p display, the PT-SP-HD12S will select 1080p as output resolution and distribute 1080p signal to displays connected to output 1~2.

Note: If the display connected to output 2 don’t support 1080p signal, there will be no output on the display.

Application

The PT-SP-HD12S has a good application in various occasions, such as computer realm, monitoring, conference room, big screen displaying, television education, command & control center and smart house etc.

Firmware Upgrade

1. Copy the latest upgrade file (.hex) to PC.

1. Connect the USB ports of PT-SP-HD12S and the PC via USB cable.
2. Launch the upgrade software by double-click the icon of EPFlash.exe, it will enter the upgrade interface shown as below:
3. Select the right port number in the dropdown list of PORT, and click OpenFile to load the upgrade file. Click Start to start firmware upgrading.

3.6 Firmware Upgrade

The PT-SP-HD12S boasts a USB port for online firmware upgrade. Follow these steps to upgrade firmware:

1. Step4. Copy the latest upgrade file (.hex) to PC.
2. [[IMG p12.webp]]
3. Step5. Connect the USB ports of PT-SP-HD12S and the PC via USB cable.
4. Step6. Launch the upgrade software by double-click the icon of EPFlash.exe, it will enter the upgrade interface shown as below: EP FLASH version 1.1.0.8 upgrade interface
5. Step7. Select the right port number in the dropdown list of PORT, and click OpenFile to load the upgrade file. Click Start to start firmware upgrading.

Video Input

Video Output

Video General

General

Note: The PT-SP-HD12S supports 4K& 3D HDMI signals, please adopt quality HDMI cables compliant with HDMI1.4 for better transmission when connecting 4K or 3D sources.

Panel Drawing

Troubleshooting & Maintenance

Note: If your problem still remaining after following the above troubleshooting steps, please find further assistance.

After-Sales Service

If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.

1. Product Limited Warranty: The product will be free from defects in materials and workmanship for two years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
2. What the warranty does not cover (servicing available for a fee):

• Warranty expiration.
• Factory applied serial number has been altered or removed from the product.
• Damage, deterioration or malfunction caused by:
• Normal wear and tear.
• Use of supplies or parts not meeting our specifications.
• No certificate or invoice as the proof of warranty.
• The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
• Damage caused by force majeure.
• Servicing not authorized by distributor.
• Any other causes which does not relate to a product defect.
• Delivery, installation or labor charges for installation or setup of the product.

1. Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.

Legal & Compliance

Product identification

Model: PT-SP-HD12S – manual version 1.0

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

EU conformity

PureLink hereby declares that this product PureTools PT-SP-HD12S complies with Directives 1907/2006/EU und 2011/65/EU. PureLink GmbH hereby declares that this product PureTools PT-SP-HD12S complies with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU Declaration of Conformity is available at: http://www.purelink.de/ce/4251364706923_CE.pdf

Disposal of electrical and electronic equipment

WEEE reg. no.: DE 93847290

The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.