Safety precautions

• Unpack the equipment carefully and save the original box and packing material for possible future shipment.
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of extrusion.
• Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with fine ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Introduction to PT-SP-HD12UHD

The PT-SP-HD12UHD is a HDMI splitter featuring the capability to repeat HDMI or DVI source to 2 displays synchronously. Compliance with HDMI2.0& HDCP2.2, PT-SP-HD12UHD provides comprehensive resolution capacities up to 4K& 1080p 3D. It’s capable to automatically recognize the resolution and HDCP compliant status of the input signal. Input signal will be automatically equalized for reliable transmission with proper EDID Management.
Moreover, PT-SP-HD12UHD supports convenient online update through USB port.

Feature

• 2 simultaneous HDMI outputs
• Support Hot-plug
• Support HDMI2.0& HDCP2.2 and is backwards compatible with all previous HDMI standards
• The highest resolution is up to 4Kx2K@60Hz 4:4:4
• Transmit 4Kx2K signal for 10m via AWG24 HDMI cable
• High bandwidth: 18Gbps
• Auto-identify input resolution
• Support EDID management, automatically adopt the resolution of the first detected display from port 1~2
• Intuitive indicator for connection status& input HDCP compliance status
• Convenient online firmware update

Packing List

• 1 x PT-SP-HD12UHD
• 2 x Mounting Ears
• 4 x Screws
• 4 x Plastic Cushions
• 1 x Power Adapter (DC 5V 2A)
• 1 x User Manual

Note: Please contact your distributor immediately if you found any damage or defect in the components.

Panel Description

OUT 2 OUT 1 IN DC 5V IN 1 2 FW 1 2 3 4 5 6 7

Note: Pictures shown in this manual are for reference only, different model and specifications are subject to real product.Output HDCP compliant status depends on input signal. When the input signal is with HDCP, then output signal is with HDCP and vice versa.HDMI signal contains both HDMI video signal and embedded audio signal (PCM, Dolby Digital, DTS, DTS-HD), while DVI signal contains solely video signal.The PT-SP-HD12UHD is capable to switch input signal format according to the displays.For example, when the input signal is HDMI and the display can only support DVI signal, PT-SP-HD12UHD will switch the signal into DVI format.EDID Management: automatically manage output signal (e.g. output resolution) to fit all displays.

System Connection

Usage Precaution

• Verify all components and accessories included before installation.
• System should be installed in a clean environment with proper temperature and humidity (see page8 for limits).
• All of the power switches, plugs, sockets and power cords should be insulated and safe.
• All devices should be connected before power on.

System Diagram

The following diagram illustrates typical input and output connections that can be utilized with PT-SP-HD12UHD:
4K Blu-ray HDTV
Projector
Screen
HDMI IN:
HDMI OUT:

Connection Procedure

1. Connect a HDMI/ DVI source device (e.g. Blue-ray DVD) to the IN socket of PT-SP-HD12UHD with HDMI cable.
2. Connect HDMI displays to OUT 1 and OUT 2 sockets of PT-SP-HD12UHD with HDMI cables.
3. Plug a DC 5V 2A power adapter to the power port of PT-SP-HD12UHD.

Note: All the ports support hot-plug. It’s important to know that hot plugging a display may result in splash screen at output ends.

EDID Management

The PT-SP-HD12UHD comprises 1 HDMI input port & 2 HDMI output ports, and it possess built-in EDID management function.

1. When all output ports are connected with displays, the source device will gain the EDID data from the display connected output 1 port. At this point, if you disconnect the output 1 display and want the source device to gain the EDID from the output 2, the PT-SP-HD12UHD need to be restarted.
2. All connected displays should be compatible, for example: when output 1 connects with a 1080p display, PT-SP-HD12UHD will select 1080p as output resolution and distribute 1080p signal to displays connected to output 1~2. If the display connected to output 2 don’t support 1080p signal, there will be no output on the display.

Application

The PT-SP-HD12UHD has a good application in various occasions, such as computer realm, monitoring, conference room, big screen displaying, television education, command & control center and smart house etc.

Specification

Supported Input Video Format

Note: The PT-SP-HD12UHD supports 4K & 3D HDMI signals, please adopt quality HDMI cables compliant with HDMI2.0 for better transmission when connecting 4K or 3D sources.

Panel Drawing

OUT 2 OUT 1 IN DC 5V
IN 1 2 FW
PT-SP-HD12UHD
1x2 Splitter
4K (60Hz 4:4:4) HDR
102.4 mm
70.4 mm
16 mm

Troubleshooting & Maintenance

If your problem persists after following the above troubleshooting steps, seek further help from authorized dealer or our technical support.

After-Sales Service

If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.

1. Product Limited Warranty: The product will be free from defects in materials and workmanship for two years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
2. What the warranty does not cover (servicing available for a fee):
3. Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.

• Warranty expiration.
• Factory applied serial number has been altered or removed from the product.
• Damage, deterioration or malfunction caused by:
• Normal wear and tear.
• Use of supplies or parts not meeting our specifications.
• No certificate or invoice as the proof of warranty.
• The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
• Damage caused by force majeure.
• Servicing not authorized by distributor.
• Any other causes which does not relate to a product defect.
• Delivery, installation or labor charges for installation or setup of the product.

Asking for Assistance

Technical Support:
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99

Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday

Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de

Legal & Compliance

Product identification

Model: PT-SP-HD12UHD – manual version 1.0

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

EU conformity

PureLink hereby declares that this product PureTools PT-SP-HD12UHD complies with Directives 1907/2006/EU und 2011/65/EU. PureLink GmbH hereby declares that this product PureTools PT-SP-HD12UHD complies with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU Declaration of Conformity is available at: http://www.purelink.de/ce/4251364706909

FCC

Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.

Disposal of electrical and electronic equipment

WEEE reg. no.: DE 93847290

The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.