Safety and Notice
Please read all of these instructions carefully before you use the device. Save this manual for future reference. The PT-SP-HD18-HDR 1x8 HDMI 2.0a Splitter with Built-in & User Adjustable EDID Management has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the PT-SP-HD18-HDR should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
- Follow all instructions and warnings marked on this unit.
- Do not attempt to service this unit yourself, except where explained in this manual.
- Provide proper ventilation and air circulation and do not use near water.
- Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
- Use only the power adapter and power cords and connection cables designed for this unit.
- Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
Introduction
The PT-SP-HD18-HDR 1x8 HDMI 2.0a Splitter with Built-in & User Adjustable EDID Management provides the most cost effective and advanced HDMI splitter solution on the market, by which the high definition video and high quality audio can be transmitted to 4 different locations without losing quality. PT-SP-HD18-HDR supports all 3D formats and the true 4K2K video!
With built-in USB firmware update mechanism, the compatibility among countless HDMI sources and receivers can be further guaranteed. With the upmost HDR/4K2K@60 4:4:4 8bits and high definition audio support, PT-SP-HD18-HDR is suitable for high quality HDMI broadcasting, digital signage and education applications!
Features
- HDMI 2.0a compliant
- Supports 4K2K@60 4:4:4 8bits
- Supports HDR*, which is 4K2K@60 4:2:0 10bits**
- HDCP 2.2 and 1.4 compliant
- Wide frequency range: 25MHz~600MHz
- Video bandwidth: 18Gbps
- Supports default EDID and EDID learning from display
- Supports xvYCC, x.v.Color & Deep Color
- Mini-USB firmware update for expanding compatibility
- Supports Dolby Digital, DTS-HD and Dolby TrueHD audio
- Allows cascading
- Easy installation
Note: * HDR = High Dynamic Range.
** The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384 MHz, and the 4K2K@60 4:4:4 8bits is 594MHz.
Package Contents
- 1x PT-SP-HD18-HDR
- 1x DC 5V4A wall wart
- 1x User Manual
Specification
| Item | Description |
|---|---|
| Role of usage | 1x4 Distribution Amplifier (Splitter) |
| HDMI Compliance | HDMI 2.0a |
| DVI Compliance | DVI 1.0 |
| HDCP Compliance | HDCP 2.2 |
| Video Bandwidth | Single-link 600MHz [18Gbps] |
| Video Support | HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits) |
| Audio Support | DTS-HD Master Audio, Dolby TrueHD Dolby Digital, DTS, DVD-Audio, LPCM, SACD, MPCM |
| ESD Protection | −Human body model — ±19kV (air-gap discharge) & ±12kV (contact discharge) −Core chipset — ±2kV |
| PCB stack-up | 4-layer board [impedance control — differential 100Ω; single 50Ω] |
| Firmware update | Feasible via Mini-USB port |
| Input | 1x HDMI |
| Output | 8x HDMI |
| HDMI Connector | Type A [19-pin female] |
| Rotary control switch | EDID Mode selection |
| Mechanical | |
| Housing | Metal enclosure |
| Dimensions [L x D x H] | Model 243 x 98 x 25mm [9.5" x 3.9" x 1"] Package 371 x 170 x 77mm [1’2" x 6.7" x 3"] Carton 410 x 368 x 393mm [1’3" x 1’2" x 1’3"] |
| Weight | Model 880 g [31 oz] Package 1.58 kg [3.5 lbs] |
| Fixedness | Wall-mounting case |
| Power supply | 5V 4A DC |
| Power consumption | 11 Watt (max) |
| Operation temperature | 0~40°C [32~104°F] |
| Storage temperature | -20~60°C [-4~140°F] |
| Relative humidity | 20~90% RH (no condensation) |
Connection Diagram
Connection diagram showing HDMI cabling from Blu-ray Player to PT-SP-HD18-HDR, and from PT-SP-HD18-HDR outputs to TV with HDMI Input, Flat Panel Display (x3), and Projector (x4).
- Blu-ray Player
- HDMI CABLE
- PT-SP-HD18-HDR
- HDMI CABLE
- TV with HDMI Input
- HDMI CABLE
- Flat Panel Display x3
- HDMI CABLE
- Projector x4
Panel Description
Front Panel
Rear Panel
- 1 - EDID Ultra-HD(4K2K@60) - 24bit 2D video & 7.1ch audio
- 2 - EDID Ultra-HD(4K2K@60) - 24bit 2D video & 2ch audio
- 3 - EDID Ultra-HD(4K2K@30) - 24bit 2D video & 7.1ch audio
- 4 - EDID Ultra-HD(4K2K@30) - 24bit 2D video & 2ch audio
- 5 - EDID Full-HD(1080p@60) - 24bit 2D video & 7.1ch audio
- 6 - EDID Full-HD(1080p@60) - 24bit 2D video & 2ch audio
- 7 - EDID Full-HD(1080p@60) - 24bit 3D video & 7.1ch audio
- 8 - EDID Full-HD(1080p@60) - 24bit 3D video & 2ch audio
- 9 - EDID Full-HD(1080p@60) - 36bit 2D video & 7.1ch audio
- A - EDID Full-HD(1080p@60) - 36bit 2D video & 2ch audio
- B- EDID HD(1080p@30)(1080i@60)(720p@60)-24bit 2D video & LPCM7.1ch/Dolby Digital
- C - EDID HD(1080p@30)(1080i@60)(720p@60) - 24bit 2D video & 2ch audio
- D - Auto EDID analysis learning mode
- E - Learn EDID from output1
- F - Learn EDID from output2
- 1. Power LED: Lights on when device is ready
- 2. Signal LED:Signal LED indicator
- 3. HDMI IN: Connect to a HDMI input source
- 4. HDMI OUT1-8: HDMI outputs to HDMI displays
- 5. Mini-USB: For technical support only [firmware update]
- 6. MODE: 0 - F/W update mode
- 7. +5V DC: Connect to the +5V DC 4A power supply unit
Automatic EDID learning will detect all the connected HDMI equipped monitors and analyze all the content of EDID. The EDID with minimal resolution support will be the reference EDID for incoming HDMI source players.
Installation
- Switch off all devices, including monitors.
- Connect to the displays.
- Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In.
- Make sure the rotary switch is NOT at “MODE 0”
- Plug in 5V DC power supply.
- Power on the HDMI monitors.
- Power on the HDMI source
Notice
- While connecting a new monitor to the splitter under mode D (auto EDID) & mode E and F (EDID learning), experiencing a short period of time without displaying might be expected. The splitter will do Automatic EDID learning which analyzes the newly connected monitor to see if the EDID for the HDMI input is necessary to update!
- For firmware update through Mini-USB, users MUST turn the power off, set the rotary switch to “0”, and then connect the Mini-USB cable between PC and device. Open the firmware update software, [1] set the correct com port and baud rate (57600 is recommended), [2] click the “File” button to direct to the firmware HEX or BIN file, power on the device and press “Program MCU” symbol to firmware update. Once update process is done, please power off the device and set the rotary switch back to other mode (NOT to “0”).
Broadcasts HDMI signal to 8 DVI displays!
Warranty
Limited Warranty
The SELLER warrants the PT-SP-HD18-HDR 1x8 HDMI 2.0a Splitter with Built-in & User Adjustable EDID Management free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surge. This warranty is offered by the SELLER for its BUYER with direct transaction only. This warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges to and from the SELLER. Cables and power adapters are limited to a 30 day warranty and must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However, The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the PT-SP-HD18-HDR features and specifications is subject to change without further notice.
Asking for Assistance
Technical Support:
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 - 99
Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday
Write To:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
Legal & Compliance
Product identification
Model: PT-SP-HD18-HDR – manual version 1.0
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Disposal of electrical and electronic equipment
WEEE reg. no.: DE 93847290
The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.