Safety precautions

To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference.

• Unpack the equipment carefully and save the original box and packing material for possible future shipment
• Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
• Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.
• Refer all servicing to qualified service personnel.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Do not put any heavy items on the extension cable in case of extrusion.
• Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.
• Install the device in a place with fine ventilation to avoid damage caused by overheat.
• Keep the module away from liquids.
• Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately.
• Do not twist or pull by force ends of the optical cable. It can cause malfunction.
• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
• Unplug the power cord when left unused for a long period of time.
• Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes.

Introduction to PT-SW-HD41S

The PT-SW-HD41S is a HDMI switcher accommodates 4 HDMI inputs. Select any of the inputs by front panel button or IR Remote, the corresponding indicator on the front panel will illuminate to show real-time I/O connection status. Compliance with HDMI 1.4& HDCP1.4, PT-SW-HD41S can transmit non-depressed 4K (at max) signal.
PT-SW-HD41S boasts comprehensive audio capacities including PCM, Dolby Digital, DTS, and DTS-HD. Besides, it provides an ARC audio output socket to transfer ARC audio to ARC speakers like Yamaha.
Moreover, PT-SW-HD41S supports convenient online firmware update through USB port.

Feature

• 4 HDMI inputs.
• Support Hot-plug.
• Compliant with HDMI 1.4, capable to transmit 4K signal.
• High bandwidth: 10.2Gbps.
• HDCP1.4 compliant, support auto-detecting for input HDCP compliant status.
• Support EDID management, including 5 embedded EDID data, 10 (max) user-definable EDID data, and EDID data automatically captured and copied.
• Intuitive indicators for power, switch mode, I/O connection status and audio output signal.
• Convenient online firmware update.

Package Content

• 1 x PT-SW-HD41S
• 2 x Mounting Ears with 4 Screws
• 4 x Plastic Cushions
• 1 x IR Remote
• 1 x IR Receiver
• 1 x Power Adapter (DC 5V 1A)
• 1 x User Manual

Note: Confirm if the product and the accessories are all included, if not, please contact with your dealers.

Front Panel

Note: Output HDCP compliant status depends on input signal. When the input signal is with HDCP, then output signal is with HDCP and vice versa.

Rear Panel

Note: Pictures shown in this manual are for reference only, different model and specifications are subject to real product.

System Connection

Usage Precaution

• System should be installed in a clean environment, preferably at ambient temperature or within given working temperature range (see page 16 for limits).
• All of the power switches, plugs, sockets and power cords should be insulated.
• All devices should be connected before power on.

System Diagram

The following diagram illustrates typical input and output connections that can be utilized with PT-SW-HD41S:
HDTVRay-Blu DVD Game Console
Laptop
Camera
Receiver RemoteCentral Control System
HDMI:
Audio:
Control:

Connection Procedure

1. Connect HDMI/ DVI source device(s) (e.g. Blue-ray DVD) to the HDMI INPUT ports of PT-SW-HD41S with HDMI cable.
2. Connect HDMI displays to HDMI OUTPUT ports of PT-SW-HD41S with HDMI cable.
3. Connect an amplifier to the audio output.
4. Connect an IR Receiver to the IR IN to enable IR control.
5. Connect the control device (e.g. a PC) to the RS232 port to enable RS232 control.
6. Plug a DC 5V power adapter to the power port of PT-SW-HD41S.

Note: All the ports support hot-plug.

3.3 Connection Procedure

1. Connect HDMI/ DVI source device(s) (e.g. Blue-ray DVD) to the HDMI INPUT ports of PT-SW-HD41S with HDMI cable.
2. Connect HDMI displays to HDMI OUTPUT ports of PT-SW-HD41S with HDMI cable.
3. Connect an amplifier to the audio output.
4. Connect an IR Receiver to the IR IN to enable IR control.
5. Connect the control device (e.g. a PC) to the RS232 port to enable RS232 control.
6. Plug a DC 5V power adapter to the power port of PT-SW-HD41S.

Note: All the ports support hot-plug.

ARC Solution

The ARC (Audio Return Channel) enables a display, via a single HDMI cable, to either send or receive audio via HDMI, upstream or downstream, depending on system set-up and user preferences, increasing user flexibility. Connect the devices abiding by the following figure:

Note: All utilized devices including the HDMI cable should support Audio Return Channel functionality when connected to Audio Return Channel-enabled devices.

Application

PT-SW-HD41S has a good application in various occasions, such as computer realm, monitoring, conference room, big screen displaying, television education, command & control center and smart house etc.
Speaker Speaker
HDTV
Audio
AudioAudio

Button Control

The SOURCE/AUTO button on the front panel can be used to change input source and switch mode.

• Switch input source: Press the button to switch circularly among input 1~4, the corresponding indicator illuminate green synchronously for easy recognition.
• Change switch mode: Input signal supports auto-switch and manual switch. Press and hold SOURCE/AUTO button for 3 seconds or more to switch between the two modes. (Default: Manual switch.)

In auto-switch mode, source selection abides by the following principles:

• New input principle: Once detecting a new input signal, PT-SW-HD41S switch to this new signal automatically.
• Power rebooting principle: Once rebooted, PT-SW-HD41S will automatically select input 1 as input source even though there is no connection in input 1.
• Signal removing principle: Once removed the current display signal, PT-SW-HD41S will detect all input signals with priority from INPUT 1 to INPUT 4. It will transfer the first available source to the output device.

In manual-switch mode, once rebooting, PT-SW-HD41S will output the source signal before rebooting.

IR Control

Connect an IR receiver to the IR IN port, users can control the device via the included IR remote. Here is a brief introduction to the IR remote:

• MENU:
• Mute: press to switch on/off Audio & Video output
• Audio: switch between HDMI signal and ARC audio
• Source/Auto: share the same function with SOURCE/AUTO button on the front panel

• INPUTS:
• 1~4: press to switch input source, correspond to input 1~4 separately
• Prev/Next: switch to the previous/next input source abiding by the order 1~4

RS232 Control

PT-SW-HD41S provides with 1 3.5mm RS232 port for serial port control. Connect PT-SW-HD41S to the control device (e.g. a PC) with RS232 cable and set the parameters in the right manner, the control device is capable to control PT-SW-HD41S via designed software.

RS232 Control Software

• Installation: Copy the control software file to the computer connected with PT-SW-HD41S.
• Uninstallation: Delete all the control software files in corresponding file path.

Basic Setting:
Firstly, connect PT-SW-HD41S with an input device and an output device. Then, connect it with a computer which is installed with RS232 control software.
Double-click the software icon to run this software.
Here we take the software CommWatch.exe as example. The icon is showed as below:

The interface of the control software is shown as below:

• Parameter Configuration area
• Command Sending area
• Monitoring area, indicates whether the command sent works.

RS232 Command

Note: In above commands, “[” and “]” are symbols for easy reading and do not need to be typed in actual operation.Type in the complete commands including ending symbol “.”.Load the desired EDID file to the RS232 control software after sending command EDIDUpgrade[x]., it will show “EDIDUpgrade OK!” after the upgrade is completed.

EDID Management

PT-SW-HD41S provides with convenient EDID management to create effective communication between the display and sources.

In factory default status (Status: 0000), PT-SW-HD41S passes through the signals directly, input & output device process the signal automatically. You can change the EDID data by adjusting the 4-pin EDID DIP switcher.

Invoke EDID data

Here is an introduction to the EDID data to be utilized:

• Embedded EDID data: 5 sets in total, the chart below illustrates the 5 Embedded EDID data:

Custom EDID data: max at 10 sets, custom EDID data (.bin) and program the data into the device by sending command EDIDUpgrade[x]..

To get the corresponding switcher status of a serial number for EDID data, convert the decimal number to binary one first. The chart below shows switcher status for 6~15 (serial numbers for custom EDID data):

EDID Copy: automatically capture the EDID data of the display and copy to input devices

Upgrade EDID data

EDID data supports upgrade via serial port. Follow these steps to upgrade EDID:

1. Send command to upgrade the saved EDID data one by one.
2. Copy the upgrade file (.bin) to PC.
3. Send command EDIDUpgrade[x]. via the RS232 control software. x is the serial number of EDID data x=1~5, correspond to the 5 embedded EDID data listed on the above chart separately; x=6~15, correspond to the 10 custom EDID separately;
4. Click Load File and select the desired upgrade file (.bin). Press Send to start upgrade.
5. It will return “EDID Upgrade OK!” when the upgrade finishes. Reboot the unit, users can adjust the dip switchers on rear panel to invoke the upgraded EDID.

Firmware Upgrade

PT-SW-HD41S boasts a USB port for online firmware upgrade on the front panel.
Follow these steps to upgrade firmware:

1. Copy the upgrade software and the latest upgrade file (.bin) to PC.
2. Connect the USB ports of PT-SW-HD41S and the PC via USB cable.
3. Double-click the update software icon (see as below).

It will enter the upgrade interface shown as below:

1. Click Connect USB.
2. Click Open to load the upgrade file, then click Updata to start firmware upgrading.

Note: The USB port can also be used to energize the device.
The COM number connected with PC is available only when from 1 to 9.

Specification

Panel Drawing

Troubleshooting & Maintenance

If your problem persists after following the above troubleshooting steps, seek further help from authorized dealer or our technical support.

After-Sales Service

If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty.

1. Product Limited Warranty: This product will be free from defects in materials and workmanship for two years (The purchase invoice shall prevail). Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the Warranty period must be presented to obtain warranty service.
2. What the warranty does not cover (servicing available for a fee):
3. Technical Support: For any questions or problems, contact your distributor or reseller and tell them the respective product name and version, the detailed failure situation as well as the formation of the cases.

• Warranty expiration.
• Factory applied serial number has been altered or removed from the product.
• Damage, deterioration or malfunction caused by:
• Normal wear and tear.
• Use of supplies or parts not meeting our specifications.
• No certificate or invoice as the proof of warranty.
• The product model showed on the warranty card does not match with the model of the product for repairing or had been altered.
• Damage caused by force majeure.
• Servicing not authorized by distributor.
• Any other causes which does not relate to a product defect.
• Delivery, installation or labor charges for installation or setup of the product.

Asking for Assistance

Technical Support:
Phone: +49 5971 800299 - 0
Fax: +49 5971 800299 – 99

Technical Support Hours:
8:30 AM to 5:00 PM Monday thru Thursday
8:30 AM to 4:00 PM Friday

Write to:
PureLink GmbH
Von-Liebig-Straße 10
D - 48432 Rheine
www.purelink.de
info@purelink.de

Legal & Compliance

Product identification

Model: PT-SW-HD41S – manual version 1.0

Trademarks and disclaimer

Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.

EU conformity

PureLink hereby declares that this product PureTools PT-SW-HD41S complies with Directives 1907/2006/EU und 2011/65/EU. PureLink GmbH hereby declares that this product PureTools PT-SW-HD41S complies with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU Declaration of Conformity is available at: http://www.purelink.de/ce/4251364706992_CE.pdf

FCC

Statement This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.

Disposal of electrical and electronic equipment

WEEE reg. no.: DE 93847290

The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.

Batteries

Batteries must not be disposed of with household waste. Return used batteries free of charge to collection points or retailers.

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.