Safety Instructions

Caution: Only skilled electricians may assemble and disassemble the housing of the product.
DANGER! Risk of life by electric shock! Avoid contacting mains voltages! Turn off the power of all circuits before working on the product!

Caution: Risk of short-circuit! Never bridge contacts! Do not put things into ventilation slots or ports!

Caution: Risk of injury by falling parts or impacts! Mind respectable connections! Install the product in the mentioned height!

• This product is not a toy and is not meant for children, because it contains small parts which can be swallowed and can injure when used inappropriately!
• Do not use any damaged products or parts.
• Remove or store the packing materials well, because children may cut themselves on them while playing. Furthermore, there is a risk of swallowing and inhalating of incidentals and insulating material.
• Install and store the product and its accessories in a way that does not infringe any person or property damage, e.g. due to falling or stumbling.
• Avoid extreme influences, e.g. like heat and coldness, direct sun insolation, vibrations and mechanical pressure.
• Do not modify or change the product or its accessories! Also mind chapter “warranty and liability“.
• Mind the specifications for transporting and use applicable methods, e.g. by using the original packing.

• If defects, mechanical damages, disturbances or other problems occur, which are not solvable with this manual, take the device out of work immediately and consult your dealer for questions, repairing or change like it is described in chapter “warranty and liability“.
• A defective device may not be put into operation, but must be protected against further use. Repairing, such as assembling and disassembling the housing is only allowed to skilled professionals. By repairing it yourself you will lose all warranties and there is a risk of electric shock and short circuit.
• Motion sensors are not suitable for use as components of an alarm system. They can trigger false alarms if the installation place has been chosen unfavourably.

Description and Function

This product is an infrared motion sensor for indoor / outdoor use and is specified as installation material. It reacts to heat radiation (infrared radiation) of moving objects that enter the detection area of the sensor, e.g. people and animals, etc. The sensor must see the area which is monitored. Thermal radiation propagates in a straight line, but is stopped by glass or other solid objects.
Entering the detection area of the sensor switches the connected electrical consumer on and after a (adjustable) time off again automatically. A built-in photocell prevents working of the motion sensor during sunlight. In addition, the ambient brightness can be adjusted by a regulator.

Intended Use

This product is made for indoor and outdoor use like described in chapter 2. We do not permit using this product in other ways. If not attending to these regulations and notes on safety, it might causes fatal accidents, injuries and damages to persons and property.

Scope of Delivery

• 1x Infrared motion sensor
• 1x User‘s manual
• 1x Installation material
• 2x Anchor
• 2x Screws

Zeiteinstellung
Time adjustment
LUX Einstellung
LUX adjustment
Erkennungsfenter
Detector window

Installing and Operating

INSTALLATION

Caution: Risk of short-circuit! Never bridge contacts! Do not put things into ventilation slots or ports!

Caution: Risk of life by electric shock!

1. Switch off the mains fuse.
2. Check with a voltage tester to be sure, all lines are really stress-free. If in doubt, a electrician must do the installation work.
3. Check the packing content for being complete.
4. Compare all products to be compatible to each other.
5. Remove the cover cap.
6. Choose the installation place away from street lighting, plants or air conditioning vents. Avoid direct sun insolation e.g. near windows.
7. Attach the cover cap to a wall or ceiling in a height, according to the technical specifications. Attend to the cable location and its lateral alignment. Look for the detection area and the detection distance as described in the technical specifications.
8. Install the motion sensor like shown:

INSTALLING

Note: The scope of delivery includes installation material for concrete surfaces. Other materials need other installation material.

WIRING

Note: L phase (hot)
N zero conductor (ground)
A consumer (lamp)

1. Plug the luster terminal onto the provided lugs.
2. Connect motion sensor and cover cap and lock the connection.
3. Adjust the direction of the motion sensor by turning and tilting the sensor unit.
4. Switch on the mains fuse.

OPERATING

1. Adjust the time settings (TIME). This means how long the lamp is on after activating.
2. Adjust the photosensitivity (LUX). This means how fast the motion sensor reacts.

Note: Motion sensors work by day and night. For daylight use, set LUX to maximum (SUN) for correct work. If the lamp is more than 60W, the distance between the lamp and sensor should be 60cm at least. The sensor and its connected lamp will have no signal at the beginning. After a Warm-up of 30sec, the sensor will start working.

Maintenance, Care, Storage and Transport

• The device is maintenance-free.
• Switch off the mains fuse and disconnect the product from mains!
• Use a dry and soft cloth to clean your product. Be careful to avoid scratches. Use a slightly moist cloth for heavy stains. Look out for live cables! Do not use any cleaning supplies. This can cause burns to the materials. Avoid liquid entry to the device.
• Avoid places with high temperatures, humidity, or places which can become wet, also during maintenance, care, storage, and transport.
• Keep the product away from children and store it at dry and dust-proof places!
• Keep the original packaging for transport and to avoid damages.

Troubleshooting

IP-Classification

INTERNATIONAL PROTECTION CLASSES ACCORDING TO DIN EN 60529 (IEC 529/VDE 047 T1)

First index figure - (foreign bodies protection)

Note: Diagrams in accordance with DIN EN 60259
An additional letter K can be used for the second index figure for classes 4 and 6 to indicate higher requirements for road vehicles.

This product is classified as:

IP 4 4

Second index figure - (water protection)

This product is classified as:

IP 4 4

Specifications

Warranty and Liability

Disposal Instructions

• The manufacturer guarantees full statutory warranty terms on all new devices.
• As the manufacturer has no influence on installation, warranty only applies to the product itself.
• If any fault or damage is detected on your device, please contact your dealer and provide your sales slip or invoice as evidence of the purchase, if necessary. Your dealer will repair the fault either on site, or send the device to the manufacturer. You make the work of our technicians considerably easier, describing possible faults in detail – only then you can be assured that faults, occurring only rarely, will be found and repaired with certainty!
• The manufacturer is not liable for damages to persons or property caused by improper installation, operation or maintenance, not described in this manual.
• Do not alter or modify the product or its accessories.
• Any use other than described in this user`s manual is not permitted and causes loss of warranty, loss of guarantee, and non-liability.

DISPOSAL NOTES

According to the European WEEE directive, electrical and electronic equipment must not be disposed with consumers waste. Its components must be recycled or disposed apart from each other. Otherwise contaminative and hazardous substances can pollute our environment. As a consumer, you are committed by law to dispose electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime for free. Particulars are regulated in national right. The symbol on the product, in the user's manual, or at the packaging alludes to these terms. With this kind of waste separation, application, and waste disposal of used devices you achieve an important share to environmental protection.

EU Declaration

MANAX connect GmbH hereby declares that this products MX-IMS030 | MX-IMS031 complie with Directives 2014/30/EU and 2014/35/EU.

The full text of the EU Declaration of Conformity is available at the following Internet address:
www.manax.de

Disclaimer

This product complies with the statutory national and European requirements. All company names and product names are trademarks of their respective owners.
All rights reserved.
We reserve our right for misprints and changes to the device, packaging or user manual.

MANAX connect GmbH

Lerchenbreite 18

38889 Blankenburg

V 2.0 - 2017

Legal & Compliance

Product identification

Model: X-IMS030 – manual version 1.0

WEEE reg. no.: DE 93847290

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.