XL No-Touch Pop-Out Mount - musta, 135kg – FAQ

Aktiivinen

VL-WM-NT600

XL No-Touch Pop-Out Mount - musta, 135kg

XL No-Touch Pop-Out -kiinnike on seinäteline 65″ ja suuremmille näytöille, joka tukee enimmäispainoa 135 kg. Se sopii VESA 300x300 -kokoa ja mukana tulevan adapterin avulla myös 800x1000 -konfiguraatioihin, ja siinä on …

KäyttöohjeCE

FAQ

VL-WM-NT600What is the maximum weight this mount can safely support and what can happen if this weight is exceeded?+–

This mount is intended for use with flat screens that do not exceed the maximum weight indicated of 135Kgs (300lbs.). Exceeding this weight limit will result in instability, causing possible injury.

Lisää:INSTALLATION SAFETY INSTRUCTIONS →

VL-WM-NT600What tools are required for installation of this product?+–

Drill Drill bit Level Measuring tape Pencil Electric Wall Scanner

Lisää:Installation tools required / CA PROP 65 →

VL-WM-NT600Can the PureLink GmbH XL No-Touch Mount be installed at any angle or orientation?+–

The PureLink GmbH XL No-Touch Mount is ONLY suitable for installation perpendicular to the floor in portrait or landscape orientation. It is NOT suitable for angled or overhead mounting.

Lisää:Note: Walls are built from different materials and require different wall bolts for best performance and safety. Please / General recommendations →

VL-WM-NT600How do you operate the mount with the Universal Controller?+–

Once the Universal Controller is positioned below the light beam, the Mount will start moving. To keep the Mount moving, make sure you sync the Universal Controller with this movement. If you remove the controller from the right spot, the Mount will STOP.

Lisää:How to use Universal Controller to operate the Mount / Move Universal Controller with the Mounts →

Esitä kysymys

Eikö kysymyksenne ole listalla?

Esittäkää se tässä – vastaamme siihen ja julkaisemme sen tässä FAQ:ssa.Esitä kysymys