Strain Relief Assembly Guide
Strain Relief Assembly Guide
What you need:
- Slide the Strain Relief with its large opening at an angle onto the cable.
- Make sure that the small ribs do not bend inwards. If necessary, a pointed object (e.g. screwdriver) can be used to carefully pull the ribs apart.
- The Strain Relief should then fit straight on the cable.
4. Slide the Strain Relief up towards the connector, carefully pull the two hooks apart and twist them into the designated holes.
Disassembly: To disassemble, carefully release the hooks from the designated holes (you may need to use your fingernails to prise the hooks) and pull the Strain Relief off the cable.
You can find more information and detailed instructions online here:
help.purelink.de
Legal & Compliance
Product identification
Models: 129 models, e.g. FI-H100-003, FI-H100-005, FI-H100-005-PCK, FI-H100-010, FI-H100-010-PCK … – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Disposal of electrical and electronic equipment
Applies to: 13 products (active-cable), e.g. FI-H150-030, FI-H150-030-PCK, FI-H150-050 …
Only for products marked with the crossed-out wheelie bin on the product or packaging.
WEEE reg. no.: DE 93847290
The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.