FX-I355-100
4K Premium High-Speed HDMI AOC Fiber Optic Cable | black, 100m
The FX-I355 is a 100m HDMI Premium High Speed with Ethernet cable from the FiberX series, featuring a hybrid fiber optic and copper construction with a 4.5mm halogen-free LSZH jacket and gold-plated HDMI-A male …
ManualFAQSpecificationsDatasheetCE declaration ↗FAQ
What is the maximum transmission distance and supported resolution of the FX-I355 cable?+–
The transmission distance is up to 100m. It supports HDMI version 2.0 with 18 Gbps bandwidth for 4K / UltraHD @60Hz resolution.
More:Datenblatt (DE) ↗
What type of cable construction does the FX-I355 use and what materials are involved?+–
The cable uses a hybrid construction with 4x OM3 glass fibers for AV and 7x copper conductors for power and data. The outer jacket is halogen-free (LSZH) and CPR compliant, with a diameter of 4.5mm.
More:Datasheet (EN) ↗
Does the FX-I355 require an external power supply?+–
No external power supply is required; the cable draws power from the source device.
More:Datasheet (EN) ↗
What connectors does the FX-I355 cable have, and what locking technology is used?+–
The cable has HDMI-A male connectors on both ends with gold-plated precision contacts, and uses the PureLink ULS™ (Ultra-Lock-System™) technology for secure locking.
What are the recommended bending radius and tensile strength for the FX-I355 cable?+–
The minimum bending radius is 45mm statically and 90mm dynamically. The tensile strength is up to 150N.
More:Datenblatt (DE) ↗
What safety or usage instructions should be observed when installing or operating the FX-I355 cable?+–
The FX-I355 is intended for indoor use only and must not be used outdoors or in moist environments. The maximum pulling tensile load is 150N; do not pull harder. The minimum bending radius is approximately 45mm statically; bending tighter will irreversibly damage the cable. The cable is unidirectional and connectors are marked “SOURCE” and “DISPLAY” and must be connected correctly.