Introduction

Thank you for choosing the active USB 3.2 Gen 1 AOC cable. With this cable, you can transmit USB signals up to a distance of 15m without external power supply. The cable is a hybrid cable containing both optical fiber and copper conductors.
It supports a maximum data rate of 5 Gbit/s per channel, is lightweight, flexible, and has a very small bending radius of only 20 mm.

Intended Use

Use is only permitted indoors, i.e., not outdoors. Contact with moisture, e.g., in bathrooms or similar environments, must be strictly avoided.
For safety and approval reasons (CE), you must not modify and/or alter the product. Using the product for purposes other than those described may damage the product. Additionally, improper use can cause hazards such as short circuit, fire, electric shock, etc.
Please read the user manual carefully and keep it. Pass the product on to third parties only together with the user manual.

Safety Instructions

Please read the user manual carefully and especially observe the safety instructions. If you do not follow the safety instructions and the guidelines for proper handling in this user manual, we accept no liability for any resulting personal injury or property damage. In such cases, the warranty/guarantee will also become void.
This product is not a toy. Keep it away from children and pets. Do not leave the packaging material lying around carelessly. It could become a dangerous toy for children. Risk of suffocation!
The maximum tensile load of the cable is 157N (16kg). Never pull the cable with a higher load. The minimum bending radius of the hybrid cable is approx. 20 mm. If the cable is bent to a smaller radius, it will be irreversibly damaged.
Be aware of tripping hazards; ensure that the cable is securely installed.
Protect the product from extreme temperatures, direct sunlight, strong shocks, high humidity, moisture, flammable gases, vapors, and solvents. Do not expose the product to mechanical stress.
If safe operation is no longer possible, take the product out of service and protect it from unintentional use.

• has visible damage
• no longer functions properly
• has been stored for an extended period under unfavorable environmental conditions or
• has been subjected to significant transport stress.

Handle the product carefully. The product can be damaged by shocks, impacts, or even falling from a low height.
Also observe the safety instructions and operating manuals of the other devices to which the product is connected.
Consult an expert if you have any doubts about the operation, safety, or connection of the product.

Scope of Delivery

• 1x USB 3.2 Gen 1 AOC Cable
• 1x User Manual DE/EN
• 1x Warning Notice

Features

• Complies with USB 3.2 Gen 1 standard, achieving a bandwidth of up to 5 Gbps
• DP Alt-Mode with 4K30 resolution
• Delivers up to 60W Power Delivery over lengths up to 15 m
• No external power supply required
• Optical hybrid cable with glass fiber and copper wire
• Backward compatible with USB 3.0 / 2.0 / 1.1
• No RF interference, operates stably in complex environments

Application

This cable can be used among others for:

• Computers / PCs
• Wearables
• TVs / Displays
• Projectors
• Mobile phones
• Power Banks
• Cameras
• Home cinemas
• Medical applications
• LED video walls
• TV stations
• Digital signage
• ... and more

Specifications

Mechanical properties and environmental compatibility

Mechanical Properties & Environmental Compatibility

Specifications

Environmental Conditions

• Operating temperature: -10–50°C
• Storage temperature: -20–60°C
• Relative humidity: 10–80%RH

Cross Section

Construction

Hybrid cable, fiber optic (high speed data), copper (low speed signals)

Cable construction

• 2 fiber cores and 2 copper conductors
• Cable jacket: PVC
• Diameter: 6.5 mm
• Connector dimensions: 49 x 13.3 x 9 mm
• Connection material: aluminum alloy
• Cable cross-section with labels: foil shielding, braid shielding, multi-core fiber, PVC jacket, conductor, grounding wire, Kevlar, premium conductor

Cable Construction

Operating and Connection Diagram

Note: The FX-I600 series is designed for use with a +5V passive power supply provided by the source device. This +5V connection, as well as the power supply of the integrated fiber optic module, is transmitted to the Receiver via a pure standard copper connection. Please ensure that the source device can supply more than 500 mA.
This cable can only be used in one direction. The connectors are marked "HOST" and "DEVICE." Each plug must be connected to the correct device to avoid signal loss.
Before using this cable, make sure all devices connected with the AOC USB cable are switched off and not powered.
Connect the "HOST" side of the USB connector to the Transmitter and the "DEVICE" side of the other USB connector to the Receiver / Display. This works without additional power supply.
We advise against using additional cables or adapters between the connectors, as the signal transmission performance may be degraded. Turn on the Transmitter/source device and the Receiver/display.

Maintenance

There are no components inside the product that require maintenance by you, so never open/disassemble it.
Have maintenance, adjustment, and repair work carried out exclusively by a specialist or a professional workshop.
If you have any questions that cannot be answered in this user manual, please contact our technical support or a qualified expert.

Cleaning

Before cleaning, disconnect the product from all connected devices.
Do not use scouring agents, solvents, aggressive cleaning agents, cleaning alcohol, or other chemical solutions, as these may damage the housing or impair the function.
Cleaning can be done with a dry, soft, and clean cloth. Do not press too hard on the housing, as this can cause scratches. Dust can be easily removed with the help of a long-haired, soft, and clean brush.

Warranty and Liability

The manufacturer grants the statutory warranty of 2 years on a new product.
Since the manufacturer has no influence on the installation of the product, the warranty and guarantee cover only the product itself.
If a fault or defect is detected in your product, please contact your dealer and, if applicable, present your receipt or invoice as proof of purchase. Your dealer will either repair the fault on site or forward the product to the manufacturer. You will greatly assist our technicians if you describe any faults in detail – only then can rarely occurring faults be reliably found and remedied!
The manufacturer is not liable for personal or property damage caused by improper installation, operation, or maintenance not described in this manual.
Do not change or modify the product and its accessories.
Any use other than described in this operating manual is prohibited and will lead to loss of warranty, guarantee, and liability exclusion.

CE Compliance

Hereby, PureLink GmbH declares that FX-I600 complies with Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.purelink.de

Device Disposal

WEEE Reg. No.: DE 93847290
Electrical and electronic equipment must not be disposed of with household waste according to the European WEEE Directive. As a consumer, you are obliged under the ElektroG to return electrical and electronic equipment free of charge at the end of their life to the designated public collection points or to the point of sale. Details are regulated by the respective state law. The symbol on the product, the user manual or the packaging indicates these regulations. By this type of recycling of end-of-life devices, you make an important contribution to protecting our environment.

Disclaimer

The product complies with the statutory national and European requirements. All company names and product designations mentioned are trademarks of their respective owners.
All rights reserved.
We reserve the right to make printing errors and changes to the device, packaging, or manual.

Legal & Compliance

Product identification

Model: FX-I600-005 – manual version 1.0

Packaging

Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.