FiberX DisplayPort Fiber Extender Pigtail User Guide
Thank you for purchasing FX-P220
The optical DisplayPort pigtail extender with DPCP support extends DisplayPort signals up to 300m using single strand multi-mode optic fiber. It supports display resolutions up to 2560x1600 (WQXGA).
Package Contents
- FX-P220 Transmitter & Receiver
- +5V DC Power supply x 1pcs
- User Guide
If any of the above items are missing, please contact your supplier for support.
Note: Package content may differ if you have placed a special order or placed order from anywhere other than PureLink GmbH. PureLink GmbH reserves the right to make changes without further notice to a product described herein to improve reliability, design, packaging or function.
Installation
Installation Steps
- Connect the Transmitter module to the DisplayPort source device.
- Connect the Receiver module to the display.
- Connect a single strand multi-mode SC terminated optic fiber (50/125μm) from the Transmitter to the Receiver module.
- Connect the included +5V DC power supply into Receiver module.
- A blue indicator LED will light up after all connections are completed.
Note: The Transmitter module does not need to be externally powered unless the source device does not supply enough power through the DVI connector.
LED indicator
- DC +5V
- Power jack
- SC type optical port
FiberX DisplayPort Fiber Extender Pigtail User Guide
We, PureLink GmbH hereby warrant the final purchase of our product as follows. In case of defect, please contact the reseller from which you purchased this item.
One year limited warranty
Customers are liable to a free of charge repair or replacemenent, if goods are found to be defective with in 1(one) year of the purchase date, providing the unit has not been mistreated.
Out of warranty services
A product is deemed to be out of warranty and may be liable to customer charges when it is past a year in age or if the defect is not related to manufacturing, as in the following cases:
- Product defects caused by accident, disaster.
- Damage to product caused by the customer’s carelessness or mistaken application.
- Damage to product caused by the application of parts or products not supplied or sold by our company.
- Damage to product and any related defect caused by unwarranted service personnel or any indication that chassis covers have been removed or tampered with.
Warranty
Application
Trouble shooting
depending on LED indicator status
| Condition | Check |
|---|---|
| No display TX Solid / RX Blink | Check if monitor is powered on Check if DisplayPort source is selected on monitor input setting |
| No display TX Blink / RX Solid | Check if the PC and display are powered on and properly booted. Check if optical fiber is connected properly. |
| No display TX Blink / RX Blink | Please make sure that power supply is connected into TX and RX. Reset the system by de-plugging and re-plugging all connection. |
Diagram:
Display
PC
1 ch Multi-mode optic fiber w / SC connecter
Up to 300m
Note: If you are still experiencing problems, It may be neccessary to clean the module connector or SC fiber cable. Around 80% of connection issues with Fiber optic systems are due to dirty connectors - for more information see the Purelink fiber cleaning guide on our website: http://www.purelink.de/fileadmin/purelink/media/sonstige/PureLink_Fiber_CleaningInstructions.pdf
Legal & Compliance
Product identification
Model: FX-P220 – manual version 1.0
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Disposal of electrical and electronic equipment
WEEE reg. no.: DE 93847290
The crossed-out wheelie bin symbol on the product, packaging or in this manual means that electrical and electronic equipment must not be disposed of with household waste at the end of its life. Hand in old devices free of charge at a public collection point or return them to a distributor obliged to take them back. Remove batteries and lamps that can be removed without destroying the device before handing it in, and delete any personal data stored on the device. Details are regulated by national law. By returning old devices you help protect the environment.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.