← Products
Anti-Theft Tilt TV Wall Mount with Adjustable Arms - VESA 600x400, black
Discontinued

PM-BTL600

Anti-Theft Tilt TV Wall Mount with Adjustable Arms - VESA 600x400, black

The PureMounts TV mount is a tiltable wall mount made of steel and plastic, supporting screens from 37" to 70" and VESA patterns from 200x200 up to 600x400. It has a maximum load capacity of 50kg, offers a tilt range of …

ManualFAQ
PDF / print
Chapter 1 of 3

Anti-Theft Tilt TV Wall Mount

INSTALLATION MANUAL

Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.

Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.

Caution: Some televisions are very fragile. Improper installation may result in damage to your equipment, property or serious personal injury.

Note: This product should be installed by someone with good mechanical ability and experience with basic building construction.

Note: Tighten screws firmly, but do not over tighten. Over tightening can damage the items, greatly reducing their holding power.

Note: This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.

Caution: DO NOT use this product for any purpose not explicitly specified by the manufacturer.

Note: The manufacturer is not responsible for damage or injury caused by incorrect assembly, incorrect installation or use of this product for any other purpose than originally intended.

Caution: This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.

IMPORTANT: Ensure you have received all parts according to the component checklist (see instructions). If any parts are missing or faulty, contact your place of purchase for a replacement. Do not use substitute parts.

MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).

Chapter 2 of 3

PUREMounts

Wall mount illustration
PM-BTL400
200x200/300x300/400x200/400x400
32-55"
81-140cm
50kg
(110lbs) RATED

PM-BTL600
200x200/300x300/400x200/400x400/600x400
37-70"
94-178cm
50kg
(110lbs) RATED

PureLink GmbH
Von-Liebig-Str. 10 I 48432 Rheine I Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.

INSTALLATION MANUAL

1a

  • Use a stud finder to locate wall studs.
  • Mark and drill holes in the wall for mounting.
  • Align, level, and attach the wall plate (A) using screws (W-A) and washers (W-C).
  • Tighten all screws securely.

1b

  • Mark and drill holes in the concrete or brick wall.
  • Insert anchors (W-B) into drilled holes.
  • Align and attach the wall plate (A) using screws (W-A) and washers (W-C).
  • Tighten all screws securely.

2

  • Confirm compatibility with TV and mounting pattern.
  • Affix the brackets (B and C) to the back of the TV using suitable screws (M-A, M-B, M-C, M-D, M-E), spacers (M-F, M-G), and washers (M-H) as necessary.
  • Refer to specific bracket configuration diagrams to select appropriate screw/spacer/washer combination based on TV type and mounting holes.

3

  • With assistance, hang the TV with attached brackets onto the wall plate.

4

  • Secure the TV by pulling down and locking the latches at the bottom of the brackets.
  • Double-check installation and ensure TV is firmly attached to the wall plate.
Was this helpful?
← PreviousNext chapter →
Staff sign-in