Monitor Desk Mount
INSTALLATION MANUAL
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
- CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- CAUTION: Avoid installing the mount on a wall with hidden wires or pipes. If you must check for hidden wires or pipes to avoid possible injury.
- SAFETY: Do not allow children to play with or climb on the mount. Use only attachments and/or hardware supplied by the manufacturer.
- The product should be installed by professional installer or other qualified personnel.
- Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- The monitor stand must be assembled and used in accordance with these instructions. Improper assembly can result in serious injury.

- IMPORTANT: Inspect the mount before use for any damage. Do not use before repair. If any parts are missing or faulty, telephone your local distributor for a replacement.
MAINTENANCE: Check that the bracket is secure and to safe use at regular intervals (at least every three months).
PURE Mounts
PM-OFFICE-02
75x75 100x100
13"-27" 33-69cm
8kg x2 (17.6 lbs) RATED
PureLink GmbH
Von-Liebig-Str. 10 I 48432 Rheine I Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
Step 1a
- 10-88mm
Step 1b
- 10-88mm
Step 2
- A
- B
- D
- I
Step 3
M-A M-C M-B
✔
✖
3mm
Step 4
±45°
J
Step 5
J
Step 6
I
360º
360º
Parts List
- A (x1)
- B (x1)
- C (x1)
- D (x1)
- E (x1)
- F (x5)
- G (x1)
- H (x1)
- I (x1)
- 5mm (x1)
- 6mm (x1)
- M4x12 (x8) M-A
- M5x12 (x8) M-B
- D5 (x8) M-C
Legal & Compliance
Product identification
Model: PM-OFFICE-02 – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.
