Speaker Wall Mount
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Authorised installers must ensure that mounting surface is structurally safe and that mounting hardware used is capable of supporting the combined load. Failure to install correctly may result in the product and attached hardware collapsing, causing damage or serious personal injury.
- This product should be mounted to a solid wall, wood or brick. When mounting to a hollow wall, ensure wall is reinforced to support the weight of equipment and all attached hardware and components.
- The screws provided are for solid wall mounting and DO NOT work for other wall types.
- Do not install on plasterboard/gypsum type surfaces.
- This product is not designed for outdoor use and DO NOT over-tighten mounting screws.
- The maximum loading weight of this product is 2kg/4.4lbs. Exceeding this weight may cause instability.
Note: Ensure you have received all parts and components, checking the contents of the manufacturer’s packaging. If any parts are missing or faulty, telephone your local distributor for a replacement. Never use substitute parts. Use only parts provided by manufacturer.
Note: MAINTENANCE: Check that the bracket is secure and safe to use at regular intervals (at least every three months).
PM-SOM-01
PM-SOM-02
PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
Speaker wall mount illustration
2kg (4.4 lbs) rated weight symbol
| Part | Qty |
|---|---|
| A | x1 |
| B | x1 |
| M-A | x1 |
| M-B | x1 |
| W-A | x2 |
| W-B | x2 |
1a
5.5mm
1b
5.5mm
2
M-A, M-B
3
4
- ±60°
- +90°
- -50°
Legal & Compliance
Product identification
Model: PM-SOM-01 – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
EU conformity
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
| Directive / Regulation |
|---|
| 1907/2006/EU |
| 2011/65/EU |
The full text of the EU Declaration of Conformity is available at: www.purelink.de
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.