For Sonos One | Sonos PLAY:1
INSTALLATION MANUAL
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local dealer.
Caution: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Caution: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
- The stand and the supporting surface must be suitably stable to support the equipment and all attached hardware and components.
- Ensure that the supporting surface will NOT OVERTURN!
- Do not use this product for any purpose not explicitly specified by manufacturer.
- Manufacturer is not responsible for damage or injury caused by incorrect assembly, installation or use.
- Do not exceed the maximum weight capacity.
- Check to make sure all hardware and components are present before beginning installation. Keep screws/parts away from children.
- Do not tighten screws excessively.
- Keep out of reach of children.
- If you do not understand these instructions or have any doubts about the safety of the installation, we strongly advise consulting a professional installer.
- If the stand or any attached part becomes damaged, defective or is missing or faulty, contact your place of purchase immediately for replacement parts.
Note: MAINTENANCE: Check that the product is secure and safe to use and re-tighten any loose parts or fixings (at least once every four months).
PM-SOM-060
Speaker Floor Stand illustration
3kg (6.6 lbs) RATED
PureLink GmbH
Von-Liebig-Str. 10 | 48432 Rheine | Germany
Phone: +49 (0) 5971 800 299 0
PureLink GmbH hereby declares that this product complies with Directive 1907/2006/EU and 2011/65/EU.
PM-SOM-061 / Step 1
- Attach A to C using E and F.
Step 2
- Secure B to the assembled parts using D and a screwdriver.
Step 3
- Place the upper assembly onto the stand.
Legal & Compliance
Product identification
Model: PM-SOM-060 – manual version 1.0
Warranty and liability
The manufacturer grants the full statutory warranty on all new devices. As the manufacturer has no influence on installation, the warranty only applies to the product itself. If you detect a fault or damage, please contact your dealer and provide your sales slip or invoice as proof of purchase.
The manufacturer is not liable for damage to persons or property caused by improper installation, operation or maintenance not described in this manual. Do not alter or modify the product or its accessories. Any use other than described in this manual is not permitted and voids warranty and guarantee.
Trademarks and disclaimer
Product model and logo are trademarks. All other company and product names mentioned are trademarks of their respective owners. All rights reserved. No part of this publication may be copied or reproduced without prior written permission. We reserve the right to make changes to the device, packaging or manual and accept no liability for misprints.
Packaging
Dispose of packaging separately by material (paper/cardboard, plastics) via the local collection systems. Keep packaging material away from children – risk of suffocation. Packaging register LUCID: DE5958616449295.