Discontinued
PRO-HTX-4400-U
HDTools 4x4 HDMI HDBaseT Matrix - Ultra HD
HDTools 4x4 HDMI HDBaseT Matrix - Ultra HD.
ManualControl (TCP/IP)FAQCEAvailable control interfaces. Expand an active type to see the full command table.
No matching commands.
RS-232/Ethernet Command Code Interface3 commandsActive
Source: manual, chapter Chapter 2. Communication Code Configuration, page 21
| Command | Description | Example | Response | |
|---|---|---|---|---|
| *999CI#O#! | Connect Input # to Output # | *999CI01O01! ↵ Connect Input 1 to Output 1 | *999sC I#O#! | |
| *999CI#O# | Command code without end character causes Command Code Error | *999CI01O01 ↵ Command was not executed because “!” (End) was not included | Command Code Error | |
| *255?version! | Firmware version check | *255?version! ↵ |
RS-232 Commands14 commandsActive
Source: manual, chapter Disconnecting Switches, page 22
| Command | Description | Response | |
|---|---|---|---|
| *999DI#O#! | Disconnect command. Replace the '#'s with the input and output number(s). | ||
| *999DI01O00! | Disconnect Input 1 to no Output (00) | ||
| *999DI00O03,04! | Disconnects Outputs 3, and 4 | ||
| *999DI00O03-04! | Disconnects output 3, and 4 | ||
| *999DALLIO! | Disconnects all inputs and outputs | ||
| *999EDIDI01E3! | EDID Setting. E1–E23 are EDID codes (see list). | ||
| *999BeepON! | Beep On | ||
| *999BeepOFF! | Beep Off | ||
| *999lockon! | Front panel buttons Lock On | ||
| *999lockoff! | Front panel buttons Lock Off | ||
| *999poweron! | Power on | ||
| *999poweroff! | Power off | ||
| *999restore! | Factory setting restore | ||
| *999reboot! | Reboot |
Status Check Commands3 commandsActive
Source: manual, chapter Status Check, page 23
| Command | Description | Example | Response | |
|---|---|---|---|---|
| *999?I#! | Check Output connection status on Input 1 (replace # with input and output number(s)) | *999?I01! | ||
| *999?ALLIO! | Check all Input and Output connection status | |||
| *999?version! | Firmware version check |